UK-Swindon: Engineering design services.
Section I: Contracting Authority
I.1) Name and addresses
UK Research & Innovation
Polaris House, North Star Avenue, Swindon, SN2 1FL, United Kingdom
Tel. +44 1235445000, Email: STFCprocurement@ukri.org
Contact: STFC Procurement
Main Address: www.ukri.org
NUTS Code: UKK14
I.2) Joint procurement
The contract involves joint procurement: No.
In the case of joint procurement involving different countries, state applicable national procurement law: Not provided
The contract is awarded by a central purchasing body: No.
I.3) Communication
The procurement documents are available for unrestricted and full direct access, free of charge, at: https://www.delta-esourcing.com/tenders/UK-UK-Swindon:-Engineering-design-services./A622VM888A
Additional information can be obtained from: the abovementioned address
Tenders or requests to participate must be sent to the abovementioned address
Electronic communication requires the use of tools and devices that are not generally available. Unrestricted and full direct access to these tools and devices is possible, free of charge, at: Not provided
I.4) Type of the contracting authority
Body governed by public law
I.5) Main activity
Other activity:

Section II: Object
II.1) Scope of the procurement
II.1.1) Title: UKRI-1445 CLF Design House Services
Reference Number: UKRI-1445
II.1.2) Main CPV Code:
71320000 - Engineering design services.

II.1.3) Type of contract: SERVICES
II.1.4) Short description: UKRI wishes to establish a Contract for the provision of Design House Services for its Central Laser Facility (CLF), part of UK Research and Innovation's (UKRI) Science and Technology Facilities Council (STFC).
II.1.5) Estimated total value:
Value excluding VAT: 4,000,000
Currency: GBP
II.1.6) Information about lots:
This contract is divided into lots: No

II.2) Description

II.2.2) Additional CPV codes:
Not Provided
II.2.3) Place of performance:
UKJ14 Oxfordshire

II.2.4) Description of procurement: To support facility operations and enable our Projects, including ensuring timely delivery, CLF requires the services of a multi-disciplined Design House (DH) with excellent knowledge and capability across a broad spectrum of mechanical, electrical, software and control and instrumentation engineering skills. The DH will provide personnel to supplement existing CLF engineering capability in operations and to undertake the coordination and delivery of design packages from Front End Engineering Design (FEED) through to full manufacturing drawings for Projects. This work will be undertaken under DH management and with guidance from existing CLF staff, as required to meet the necessary timescales and agreed quality standards.

It is expected that the DH contract will last for up to 4 years from inception to completion. The maximum contract spend over the 4 year duration shall not exceed £4M excl. VAT. The Contract will be on a call-off basis, with work packages and service delivery being drawn down according to needs. However, please note there is no guaranteed volume of orders or minimum contract value associated with this Call-Off Contract.
II.2.5) Award criteria:
Criteria below
Quality criterion - Name: Technical/Quality / Weighting: 70

Cost criterion - Name: Price / Weighting: 30

II.2.6) Estimated value:
Value excluding VAT: 4,000,000
Currency: GBP
II.2.7) Duration of the contract, framework agreement or dynamic purchasing system:
Duration in months: 48
This contract is subject to renewal: No
Description of renewals: Not provided

II.2.10) Information about variants:
Variants will be accepted: No
II.2.11) Information about options:
Options: No
Description of options: Not provided
II.2.12) Information about electronic catalogues:
Tenders must be presented in the form of electronic catalogues or include an electronic catalogue: No
II.2.13) Information about European Union funds:
The procurement is related to a project and/or programme financed by European Union funds: No
Identification of the project: Not provided
II.2.14) Additional information: Not provided


Section III: Legal, Economic, Financial And Technical Information
III.1) Conditions for participation
III.1.1) Suitability to pursue the professional activity, including requirements relating to enrolment on professional or trade registers
List and brief description of conditions:
Not Provided
III.1.2) Economic and financial standing
List and brief description of selection criteria:
Not Provided
Minimum level(s) of standards possibly required (if applicable) :
Not Provided
III.1.3) Technical and professional ability
List and brief description of selection criteria:
Not Provided
Minimum level(s) of standards possibly required (if applicable) :
Not Provided
III.1.5) Information about reserved contracts (if applicable)
The contract is reserved to sheltered workshops and economic operators aiming at the social and professional integration of disabled or disadvantaged persons: No
The execution of the contract is restricted to the framework of sheltered employment programmes: No

III.2) Conditions related to the contract
III.2.1) Information about a particular profession
Reference to the relevant law, regulation or administrative provision:
Not Provided
III.2.2) Contract performance conditions
Not Provided
III.2.3) Information about staff responsible for the performance of the contract
Obligation to indicate the names and professional qualifications of the staff assigned to performing the contract: No

Section IV: Procedure
IV.1) Description OPEN
IV.1.1) Type of procedure: Open

IV.1.3) Information about a framework agreement or a dynamic purchasing system
The procurement involves the establishment of a framework agreement
Framework agreement with a single operator
Envisaged maximum number of participants to the framework agreement:
Not Provided
In the case of framework agreements justification for any duration exceeding 4 years: Not Provided


IV.1.6) Information about electronic auction:
An electronic auction will be used: No
Additional information about electronic auction: Not provided
IV.1.8) Information about the Government Procurement Agreement (GPA)
The procurement is covered by the Government Procurement Agreement: Yes
IV.2) Administrative information
IV.2.1) Previous publication concerning this procedure:
Notice number in the OJ S: Not provided
IV.2.2) Time limit for receipt of tenders or requests to participate
Date: 12/08/2021 Time: 14:00

IV.2.4) Languages in which tenders or requests to participate may be submitted: English,
IV.2.6) Minimum time frame during which the tenderer must maintain the tender:
Duration in month(s): 3

IV.2.7) Conditions for opening of tenders:
Date: 12/08/2021
Time: 14:00


Section VI: Complementary Information
VI.1) Information about recurrence
This is a recurrent procurement: No
Estimated timing for further notices to be published: Not provided
VI.2) Information about electronic workflows
Electronic ordering will be used Yes
Electronic invoicing will be accepted Yes
Electronic payment will be used Yes
VI.3) Additional Information: The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement.

UKRI is managing this procurement process in accordance with the Public Contracts Regulations 2015 (as may be amended from time to time) (the “Regulations”).

UKRI is procuring the Contract for its exclusive use.

UKRI shall utilise the e-sourcing portal Delta and all correspondence and submission of documents must be through that portal. Suppliers are to utilise the messaging system within the e-sourcing tool within the timescales detailed in this document.

If there is any doubt with regard to the ambiguity of any question or content contained in this questionnaire then Suppliers should raise a clarification question via the e-sourcing portal. Suppliers are to note that any requests for clarifications may not be considered by UKRI if they are not articulated by the Supplier within the discussion forum within the e-sourcing tool and received within the specified time.

All Tender Responses MUST be submitted through the portal. Please note, any submission of a Response which is outside of the e-sourcing portal will result in the Response not being considered.
For more information about this opportunity, please visit the Delta eSourcing portal at:
https://ukri.delta-esourcing.com/tenders/UK-UK-Swindon:-Engineering-design-services./A622VM888A

To respond to this opportunity, please click here:
https://ukri.delta-esourcing.com/respond/A622VM888A
VI.4) Procedures for review
VI.4.1) Review body:
UK Research & Innovation
Polaris House, North Star Avenue, Swindon, SN2 1FL, United Kingdom
Email: Commercial@ukri.org
Internet address: www.ukri.org
VI.4.2) Body responsible for mediation procedures:
TBC
TBC, United Kingdom
VI.4.3) Review procedure
Precise information on deadline(s) for review procedures:
Not Provided
VI.4.4) Service from which information about the lodging of appeals may be obtained:
UK Research & Innovation
Polaris House, North Star Avenue, Swindon, SN2 1FL, United Kingdom
Email: Commercial@ukri.org
VI.5) Date Of Dispatch Of This Notice: 06/07/2021

Annex A