Skip to main content.

UK Research & Innovation: UKRI-1404 R80 Tower Decommissioning and Adiabatic Cooler Design and Build

  UK Research & Innovation is using Delta eSourcing to run this tender exercise

Notice Summary
Title: UKRI-1404 R80 Tower Decommissioning and Adiabatic Cooler Design and Build
Notice type: Contract Notice
Authority: UK Research & Innovation
Nature of contract: Works
Procedure: Open
Short Description: The Contractor will be responsible for all civil, mechanical, electrical construction; installation and commissioning of the following – but not limited to - within the CDM Works area (i.e., The R80 roof area) and in accordance with the Completion Dates (TBC). •8No New Adiabatic coolers (AC’s). •Connecting pipework and fittings to and the new AC’s within the CDM Works Area. •All types of valves (isolation, regulating, non-return either manual or actuated). •Commissioning sets and pressure reducing valves. •Testing and drainage points. •Basket and other Filters. •All steel support work for the Adiabatic Coolers •All pipework supports. •All local electrical power and signal cabling with cable trays etc and supports
Published: 08/03/2022 09:43
Please note that the deadline for response to this opportunity has passed. However, you can still register or log-into the Delta eSourcing solution to prepare your Supplier Profile for future opportunities.

View Full Notice

UK-Swindon: Installation work of cooling equipment.
Section I: Contracting Authority
      I.1) Name and addresses
             UK Research & Innovation
             Polaris House, North Star Avenue, Swindon, SN2 1LF, United Kingdom
             Tel. +44 1793442000, Email: procurement@stfc.ac.uk
             Contact: STFC Procurement
             Main Address: https://www.ukri.org
             NUTS Code: UK
      I.2) Joint procurement
      The contract involves joint procurement: No.
      In the case of joint procurement involving different countries, state applicable national procurement law: Not provided       
      The contract is awarded by a central purchasing body: No.
      I.3) Communication
      The procurement documents are available for unrestricted and full direct access, free of charge, at: https://www.delta-esourcing.com/tenders/UK-UK-Swindon:-Installation-work-of-cooling-equipment./DM7499BUXY
      Additional information can be obtained from: the abovementioned address
      Tenders or requests to participate must be sent to the abovementioned address       
      Electronic communication requires the use of tools and devices that are not generally available. Unrestricted and full direct access to these tools and devices is possible, free of charge, at: Not provided
      I.4) Type of the contracting authority
            Body governed by public law
      I.5) Main activity
            Other activity:

Section II: Object
II.1) Scope of the procurement
      II.1.1) Title: UKRI-1404 R80 Tower Decommissioning and Adiabatic Cooler Design and Build       
      Reference Number: UKRI-1404
      II.1.2) Main CPV Code:
      45331230 - Installation work of cooling equipment.

      II.1.3) Type of contract: WORKS
      II.1.4) Short description: The Contractor will be responsible for all civil, mechanical, electrical construction; installation and commissioning of the following – but not limited to - within the CDM Works area (i.e., The R80 roof area) and in accordance with the Completion Dates (TBC).

•8No New Adiabatic coolers (AC’s).
•Connecting pipework and fittings to and the new AC’s within the CDM Works Area.
•All types of valves (isolation, regulating, non-return either manual or actuated).
•Commissioning sets and pressure reducing valves.
•Testing and drainage points.
•Basket and other Filters.
•All steel support work for the Adiabatic Coolers
•All pipework supports.
•All local electrical power and signal cabling with cable trays etc and supports       
      II.1.5) Estimated total value:
      Value excluding VAT: 800,000       
      Currency: GBP
      II.1.6) Information about lots:
      This contract is divided into lots: No       
   
II.2) Description
      
      II.2.2) Additional CPV codes:
      42500000 - Cooling and ventilation equipment.
      45251150 - Construction work for cooling towers.
      
      II.2.3) Place of performance:
      UK UNITED KINGDOM
      
      II.2.4) Description of procurement: The Contractor will be responsible for all civil, mechanical, electrical construction; installation and commissioning of the following – but not limited to - within the CDM Works area (i.e., The R80 roof area) and in accordance with the Completion Dates (TBC).

•8No New Adiabatic coolers (AC’s).
•Connecting pipework and fittings to and the new AC’s within the CDM Works Area.
•All types of valves (isolation, regulating, non-return either manual or actuated).
•Commissioning sets and pressure reducing valves.
•Testing and drainage points.
•Basket and other Filters.
•All steel support work for the Adiabatic Coolers
•All pipework supports.
•All local electrical power and signal cabling with cable trays etc and supports

The Contractor will be entirely responsible for organising the decommissioning and removal of the existing Balticare Cooling Towers within the CDM Works Area.
      II.2.5) Award criteria:
            Price is not the only award criterion and all criteria are stated only in the procurement documents            
      II.2.6) Estimated value:
      Value excluding VAT: 800,000       
      Currency: GBP       
      II.2.7) Duration of the contract, framework agreement or dynamic purchasing system:
      Duration in months: 29       
      This contract is subject to renewal: No       
      Description of renewals: Not provided
      
      II.2.10) Information about variants:
      Variants will be accepted: No
      II.2.11) Information about options:
      Options:       No             
      Description of options: Not provided
      II.2.12) Information about electronic catalogues:
      Tenders must be presented in the form of electronic catalogues or include an electronic catalogue: No
      II.2.13) Information about European Union funds:
      The procurement is related to a project and/or programme financed by European Union funds: No       
      Identification of the project: Not provided             
      II.2.14) Additional information: We strongly recommend that you attend the Site Tour in order to gain complete clarity of our requirements. These will be held on 22nd and 24th March 2022. Please follow the instructions within the ITT.       


Section III: Legal, Economic, Financial And Technical Information
   III.1) Conditions for participation
      III.1.1) Suitability to pursue the professional activity, including requirements relating to enrolment on professional or trade registers
      List and brief description of conditions:          
      Not Provided       
      III.1.2) Economic and financial standing       
      List and brief description of selection criteria:       
      Not Provided    
      Minimum level(s) of standards possibly required (if applicable) :       
      Not Provided    
      III.1.3) Technical and professional ability
      List and brief description of selection criteria:       
      Not Provided      
      Minimum level(s) of standards possibly required (if applicable) :          
      Not Provided   
      III.1.5) Information about reserved contracts (if applicable)   
      The contract is reserved to sheltered workshops and economic operators aiming at the social and professional integration of disabled or disadvantaged persons: No       
      The execution of the contract is restricted to the framework of sheltered employment programmes: No    
      
   III.2) Conditions related to the contract
         
      III.2.2) Contract performance conditions          
      Not Provided          
      III.2.3) Information about staff responsible for the performance of the contract
      Obligation to indicate the names and professional qualifications of the staff assigned to performing the contract: No

Section IV: Procedure
   IV.1) Description OPEN
      IV.1.1) Type of procedure: Open   
   
   IV.1.3) Information about a framework agreement or a dynamic purchasing system    
         The procurement involves the establishment of a framework agreement - NO    
         In the case of framework agreements justification for any duration exceeding 4 years: Not Provided    
   
   
   IV.1.6) Information about electronic auction:
      An electronic auction will be used: No
      Additional information about electronic auction: Not provided
   IV.1.8) Information about the Government Procurement Agreement (GPA)
      The procurement is covered by the Government Procurement Agreement: Yes       
   IV.2) Administrative information
      IV.2.1) Previous publication concerning this procedure:
         Notice number in the OJ S: Not provided       
      IV.2.2) Time limit for receipt of tenders or requests to participate
       Date: 13/04/2022 Time: 14:00
            
      IV.2.4) Languages in which tenders or requests to participate may be submitted: English,       
      IV.2.6) Minimum time frame during which the tenderer must maintain the tender:
         Duration in month(s): 3
      
      IV.2.7) Conditions for opening of tenders:
         Date: 13/04/2022
         Time: 14:00
      

Section VI: Complementary Information
   VI.1) Information about recurrence
   This is a recurrent procurement: No    
   Estimated timing for further notices to be published: Not provided
   VI.2) Information about electronic workflows
   Electronic ordering will be used No       
   Electronic invoicing will be accepted No       
   Electronic payment will be used No       
   VI.3) Additional Information: The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement.
For more information about this opportunity, please visit the Delta eSourcing portal at:
https://ukri.delta-esourcing.com/tenders/UK-UK-Swindon:-Installation-work-of-cooling-equipment./DM7499BUXY

To respond to this opportunity, please click here:
https://ukri.delta-esourcing.com/respond/DM7499BUXY
   VI.4) Procedures for review
   VI.4.1) Review body:
             UK Research and Innovation
       Swindon, United Kingdom
   VI.4.2) Body responsible for mediation procedures:
Not provided
   VI.4.3) Review procedure
   Precise information on deadline(s) for review procedures:    
    Not Provided    
   VI.4.4) Service from which information about the lodging of appeals may be obtained:
Not provided
   VI.5) Date Of Dispatch Of This Notice: 08/03/2022

Annex A


View any Notice Addenda

UK-Swindon: Installation work of cooling equipment.

Section I: Contracting authority/entity (as stated in the original notice)

I.1) Name and addresses
       UK Research & Innovation
       Polaris House, North Star Avenue, Swindon, SN2 1LF, United Kingdom
       Tel. +44 1793442000, Email: procurement@stfc.ac.uk
       Contact: STFC Procurement
       Main Address: https://www.ukri.org
       NUTS Code: UK

Section II: Object (as stated in the original notice)

II.1) Scope of the procurement
   
   II.1.1) Title: UKRI-1404 R80 Tower Decommissioning and Adiabatic Cooler Design and Build      Reference number: UKRI-1404      
   II.1.2) Main CPV code:
      45331230 - Installation work of cooling equipment.
   
   II.1.3) Type of contract: WORKS   
   II.1.4) Short Description: The Contractor will be responsible for all civil, mechanical, electrical construction; installation and commissioning of the following – but not limited to - within the CDM Works area (i.e., The R80 roof area) and in accordance with the Completion Dates (TBC).

•8No New Adiabatic coolers (AC’s).
•Connecting pipework and fittings to and the new AC’s within the CDM Works Area.
•All types of valves (isolation, regulating, non-return either manual or actuated).
•Commissioning sets and pressure reducing valves.
•Testing and drainage points.
•Basket and other Filters.
•All steel support work for the Adiabatic Coolers
•All pipework supports.
•All local electrical power and signal cabling with cable trays etc and supports

Section VI: Complementary information

V1.5) Date of dispatch of this notice: 04/04/2022

VI.6) Original notice reference:

   Notice Reference:    2022 - 433137   
   Notice number in OJ S: Not Provided
   Date of dispatch of the original notice: 08/03/2022

Section VII: Changes

VII.1) Information to be changed or added

      VII.1.1) Reason for change: Modification of original information submitted by the contracting authority    
      
      VII.1.2) Text to be corrected in original notice No: 1
                                    
         Section Number: IV.2.2          
         Place of text to be modified: Time limit for receipt of tenders or requests to participate          
         Instead of:
         Date: 13/04/2022         
         Local Time: 14:00          
         Read:
         Date: 27/04/2022         
         Local Time: 14:00                   
      
      VII.1.2) Text to be corrected in original notice No: 2
                                    
         Section Number: IV.2.7          
         Place of text to be modified: Conditions for opening of tenders          
         Instead of:
         Date: 13/04/2022         
         Local Time: 14:00          
         Read:
         Date: 27/04/2022         
         Local Time: 14:00                   
   
VII.2) Other additional information: The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement.
For more information about this opportunity, please visit the Delta eSourcing portal at:
https://ukri.delta-esourcing.com/tenders/UK-UK-Swindon:-Installation-work-of-cooling-equipment./DM7499BUXY

To respond to this opportunity, please click here:
https://ukri.delta-esourcing.com/respond/DM7499BUXY


View Award Notice