UK-Swindon: Mechanical engineering services.

Section I: Contracting Authority

I.1) Name, Addresses and Contact Point(s):
UK Research and Innovation
Polaris House, North Star Avenue, Swindon, SN2 1FL, United Kingdom
Tel. +44 1235446100, Email: procurement@stfc.ac.uk
Contact: UKRI STFC Procurement
Main Address: https://www.ukri.org
NUTS Code: UK

I.2) Joint procurement:
The contract involves joint procurement: No
In the case of joint procurement involving different countries, state applicable national procurement law: Not Provided
The contract is awarded by a central purchasing body: No

I.4)Type of the contracting authority:
Body governed by public law

I.5) Main activity:
Other activity: Research and Innovation

Section II: Object Of The Contract

II.1) Scope of the procurement

II.1.1) Title: UKRI-1307 Outside Manufacturing Dynamic Purchasing System (OM DPS)
Reference number: UKRI-1307

II.1.2) Main CPV code:
71333000 - Mechanical engineering services.


II.1.3) Type of contract: SERVICES

II.1.4) Short description: STFC, procure a considerable number of mechanical engineering bespoke and low volume production items during a year. Precision manufacture and sub assembly services are required to assist delivery on demanding engineering projects. To support this activity, UKRI intend to establish a Dynamic Purchasing System (DPS) for the provision of Outside Manufacturing (OM).The DPS will be divided into Lots according to the different manufacturing categories, as summarised below: Lot 1: Small/Medium Machining Lot 2: Large Machining Lot 3: RAL Space Machining Lot 4: Electro Discharge Machining (EDM) Lot 5: Small/Medium Fabrication Lot 6: Large Fabrication Lot 7: Vacuum Fabrication - General Lot 8: Vacuum Fabrication - RAL Lot 9: Vacuum Fabrication – DL Astec Lot 10: Additive Manufacture – (3D Printing) Plastic. Lot 11: Additive Manufacture – (3D printing) Metallic

II.1.6) Information about lots
This contract is divided into lots: Yes

II.1.7) Total value of the procurement (excluding VAT)
Value: 109,018.49

Currency:GBP

II.2) Description (lot no. 1)


II.2.1) Title:Lot 1: Small/Medium Machining
Lot No:Lot 1

II.2.2) Additional CPV code(s):
71333000 - Mechanical engineering services.


II.2.3) Place of performance
Nuts code:
UK - UNITED KINGDOM

Main site or place of performance:
UNITED KINGDOM


II.2.4) Description of the procurement: Lot 1: Small/Medium Machining

II.2.5) Award criteria:
Not Provided

II.2.11) Information about options
Options: Yes
Description of these options:This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.

It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.

II.2.13) Information about European Union funds
The procurement is related to a project and/or programme financed by European Union funds: No


II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here:
Lot 1: Small/Medium Machining Access Code:Q597GZADPB

II.2) Description (lot no. 2)


II.2.1) Title:Lot 2: Large Machining
Lot No:Lot 2

II.2.2) Additional CPV code(s):
71333000 - Mechanical engineering services.


II.2.3) Place of performance
Nuts code:
UK - UNITED KINGDOM

Main site or place of performance:
UNITED KINGDOM


II.2.4) Description of the procurement: Lot 2: Large Machining

II.2.5) Award criteria:
Not Provided

II.2.11) Information about options
Options: Yes
Description of these options:This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.

It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.

II.2.13) Information about European Union funds
The procurement is related to a project and/or programme financed by European Union funds: No


II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here:
Lot 2: Large Machining Access Code:6GPFN76R33

II.2) Description (lot no. 3)


II.2.1) Title:Lot 3: RAL Space Machining
Lot No:Lot 3

II.2.2) Additional CPV code(s):
71333000 - Mechanical engineering services.


II.2.3) Place of performance
Nuts code:
UK - UNITED KINGDOM

Main site or place of performance:
UNITED KINGDOM


II.2.4) Description of the procurement: Lot 3: RAL Space Machining

II.2.5) Award criteria:
Not Provided

II.2.11) Information about options
Options: Yes
Description of these options:This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.
It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.

II.2.13) Information about European Union funds
The procurement is related to a project and/or programme financed by European Union funds: No


II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here:
Lot 3: RAL Space Machining Access Code:79E5QRB95C

II.2) Description (lot no. 4)


II.2.1) Title:Lot 4: Electro Discharge Machining (EDM)
Lot No:Lot 4

II.2.2) Additional CPV code(s):
71333000 - Mechanical engineering services.


II.2.3) Place of performance
Nuts code:
UK - UNITED KINGDOM

Main site or place of performance:
UNITED KINGDOM


II.2.4) Description of the procurement: Lot 4: Electro Discharge Machining (EDM)

II.2.5) Award criteria:
Not Provided

II.2.11) Information about options
Options: Yes
Description of these options:This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.

It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.

II.2.13) Information about European Union funds
The procurement is related to a project and/or programme financed by European Union funds: No


II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here:
Lot 4: Electro Discharge Machining (EDM) Access Code:M7B7V7D757

II.2) Description (lot no. 5)


II.2.1) Title:Lot 5: Small/Medium Fabrication
Lot No:Lot 5

II.2.2) Additional CPV code(s):
71333000 - Mechanical engineering services.


II.2.3) Place of performance
Nuts code:
UK - UNITED KINGDOM

Main site or place of performance:
UNITED KINGDOM


II.2.4) Description of the procurement: Lot 5: Small/Medium Fabrication

II.2.5) Award criteria:
Not Provided

II.2.11) Information about options
Options: Yes
Description of these options:This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.
It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.

II.2.13) Information about European Union funds
The procurement is related to a project and/or programme financed by European Union funds: No


II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here:
Lot 5: Small/Medium Fabrication Access Code:PHA8D7XZ29

II.2) Description (lot no. 6)


II.2.1) Title:Lot 6: Large Fabrication
Lot No:Lot 6

II.2.2) Additional CPV code(s):
71333000 - Mechanical engineering services.


II.2.3) Place of performance
Nuts code:
UK - UNITED KINGDOM

Main site or place of performance:
UNITED KINGDOM


II.2.4) Description of the procurement: Lot 6: Large Fabrication

II.2.5) Award criteria:
Not Provided

II.2.11) Information about options
Options: Yes
Description of these options:This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.
It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so

II.2.13) Information about European Union funds
The procurement is related to a project and/or programme financed by European Union funds: No


II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here:
Lot 6: Large Fabrication Access Code:52F22XQMV9

II.2) Description (lot no. 7)


II.2.1) Title:Lot 7: Vacuum Fabrication – General
Lot No:Lot 7

II.2.2) Additional CPV code(s):
71333000 - Mechanical engineering services.


II.2.3) Place of performance
Nuts code:
UK - UNITED KINGDOM

Main site or place of performance:
UNITED KINGDOM


II.2.4) Description of the procurement: Lot 7: Vacuum Fabrication – General

II.2.5) Award criteria:

Price - Weighting: 10


II.2.11) Information about options
Options: Yes
Description of these options:This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration. It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.

II.2.13) Information about European Union funds
The procurement is related to a project and/or programme financed by European Union funds: No


II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/ Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here: Lot 7: Vacuum Fabrication – General Access Code:244R92926T

II.2) Description (lot no. 8)


II.2.1) Title:Lot 8: Vacuum Fabrication – RAL
Lot No:Lot 8

II.2.2) Additional CPV code(s):
71333000 - Mechanical engineering services.


II.2.3) Place of performance
Nuts code:
UK - UNITED KINGDOM

Main site or place of performance:
UNITED KINGDOM


II.2.4) Description of the procurement: Lot 8: Vacuum Fabrication – RAL

II.2.5) Award criteria:
Not Provided

II.2.11) Information about options
Options: Yes
Description of these options:This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration. It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.

II.2.13) Information about European Union funds
The procurement is related to a project and/or programme financed by European Union funds: No


II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/ Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here: Lot 8: Vacuum Fabrication – RAL Access Code:68669C8C8J

II.2) Description (lot no. 9)


II.2.1) Title:Lot 9: Vacuum Fabrication – DL Astec
Lot No:Lot 9

II.2.2) Additional CPV code(s):
71333000 - Mechanical engineering services.


II.2.3) Place of performance
Nuts code:
UK - UNITED KINGDOM

Main site or place of performance:
UNITED KINGDOM


II.2.4) Description of the procurement: Lot 9: Vacuum Fabrication – DL Astec

II.2.5) Award criteria:

Price - Weighting: 10


II.2.11) Information about options
Options: Yes
Description of these options:This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration. It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.

II.2.13) Information about European Union funds
The procurement is related to a project and/or programme financed by European Union funds: No


II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/ Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here: Lot 9: Vacuum Fabrication – DL Astec Access Code:XQ3JR9D6ZV

II.2) Description (lot no. 10)


II.2.1) Title:Lot 10: Additive Manufacture – (3D Printing) Plastic
Lot No:Lot 10

II.2.2) Additional CPV code(s):
71333000 - Mechanical engineering services.


II.2.3) Place of performance
Nuts code:
UK - UNITED KINGDOM

Main site or place of performance:
UNITED KINGDOM


II.2.4) Description of the procurement: Lot 10: Additive Manufacture – (3D Printing) Plastic

II.2.5) Award criteria:
Not Provided

II.2.11) Information about options
Options: Yes
Description of these options:This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.
It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.

II.2.13) Information about European Union funds
The procurement is related to a project and/or programme financed by European Union funds: No


II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for - provided here:
Lot 10: Additive Manufacture – (3D Printing) Plastic Access Code:4NTBAA68F8

II.2) Description (lot no. 11)


II.2.1) Title:Lot 11: Additive Manufacture – (3D printing) Metallic
Lot No:Lot 11

II.2.2) Additional CPV code(s):
71333000 - Mechanical engineering services.


II.2.3) Place of performance
Nuts code:
UK - UNITED KINGDOM

Main site or place of performance:
UNITED KINGDOM


II.2.4) Description of the procurement: Lot 11: Additive Manufacture – (3D printing) Metallic

II.2.5) Award criteria:
Not Provided

II.2.11) Information about options
Options: Yes
Description of these options:This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.
It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.

II.2.13) Information about European Union funds
The procurement is related to a project and/or programme financed by European Union funds: No


II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for - provided here:
Lot 11: Additive Manufacture – (3D printing) Metallic Access Code:YR5783E5T6


Section IV: Procedure

IV.1) Description

IV.1.1)Type of procedure: Restricted


IV.1.3) Information about a framework agreement or a dynamic purchasing system
The procurement involves the establishment of a framework agreement: No
A dynamic purchasing system was set up: Yes

IV.1.6) Information about electronic auction
An electronic auction has been used: No

IV.1.8) Information about the Government Procurement Agreement (GPA)
The procurement is covered by the Government Procurement Agreement: Yes

IV.2) Administrative information

IV.2.1) Previous publication concerning this procedure
Notice number in the OJEU: 2022/S 000-036319

IV.2.8) Information about termination of dynamic purchasing system
The notice involves the termination of the dynamic purchasing system published by the above contract notice: No

IV.2.9) Information about termination of call for competition in the form of a prior information notice
The contracting authority will not award any further contracts based on the above prior information notice: No

Section V: Award of contract

Award Of Contract (No.1)

Contract No: UKRI-1307
Lot Number: Not Provided
Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

A contract/lot is awarded: Yes


V.2) Award of contract

V.2.1) Date of conclusion of the contract: 30/06/2023

V.2.2) Information about tenders
Number of tenders received: 1
Number of tenders received from SMEs: Not Provided
Number of tenders received from tenderers from other EU Member States: Not Provided
Number of tenders received from tenderers from non-EU Member States: Not Provided
Number of tenders received by electronic means: Not Provided

V.2.3) Name and address of the contractor

The contract has been awarded to a group of economic operators: No

Contractor (No.1)
Atlantic Precision Engineering Ltd, 02448830
Sovereign House,, 155 High Street, Aldershot, GU11 1TT, United Kingdom
NUTS Code: UKJ36
The contractor is an SME: Yes

V.2.4) Information on value of the contract/lot (excluding VAT)
Initial estimated total value of the contract/lot: 7,476
Total value of the contract/lot: 7,476
Currency: GBP

V.2.5) Information about subcontracting
The contract is likely to be subcontracted: No


Award Of Contract (No.2)

Contract No: Not Provided
Lot Number: Not Provided
Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

A contract/lot is awarded: Yes


V.2) Award of contract

V.2.1) Date of conclusion of the contract: 30/06/2023

V.2.2) Information about tenders
Number of tenders received: 1
Number of tenders received from SMEs: Not Provided
Number of tenders received from tenderers from other EU Member States: Not Provided
Number of tenders received from tenderers from non-EU Member States: Not Provided
Number of tenders received by electronic means: Not Provided

V.2.3) Name and address of the contractor

The contract has been awarded to a group of economic operators: No

Contractor (No.1)
Atomic Precision Ltd, 12301683
39 Blenheim Gardens, Wantage, OX12 0NP, United Kingdom
NUTS Code: UKJ14
The contractor is an SME: Yes

V.2.4) Information on value of the contract/lot (excluding VAT)
Initial estimated total value of the contract/lot: 1,440
Total value of the contract/lot: 1,440
Currency: GBP

V.2.5) Information about subcontracting
The contract is likely to be subcontracted: No


Award Of Contract (No.3)

Contract No: Not Provided
Lot Number: Not Provided
Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

A contract/lot is awarded: Yes


V.2) Award of contract

V.2.1) Date of conclusion of the contract: 30/06/2023

V.2.2) Information about tenders
Number of tenders received: 1
Number of tenders received from SMEs: Not Provided
Number of tenders received from tenderers from other EU Member States: Not Provided
Number of tenders received from tenderers from non-EU Member States: Not Provided
Number of tenders received by electronic means: Not Provided

V.2.3) Name and address of the contractor

The contract has been awarded to a group of economic operators: No

Contractor (No.1)
Beechwood Engineering Ltd, 03215223
Cocker Avenue, Lancashire, FY6 8JU, United Kingdom
NUTS Code: UKD4
The contractor is an SME: Yes

V.2.4) Information on value of the contract/lot (excluding VAT)
Initial estimated total value of the contract/lot: 12,915
Total value of the contract/lot: 12,915
Currency: GBP

V.2.5) Information about subcontracting
The contract is likely to be subcontracted: No


Award Of Contract (No.4)

Contract No: Not Provided
Lot Number: Not Provided
Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

A contract/lot is awarded: Yes


V.2) Award of contract

V.2.1) Date of conclusion of the contract: 30/06/2023

V.2.2) Information about tenders
Number of tenders received: 1
Number of tenders received from SMEs: Not Provided
Number of tenders received from tenderers from other EU Member States: Not Provided
Number of tenders received from tenderers from non-EU Member States: Not Provided
Number of tenders received by electronic means: Not Provided

V.2.3) Name and address of the contractor

The contract has been awarded to a group of economic operators: No

Contractor (No.1)
GJ Maintenance Engineering Ltd, 07484508
Dock Road Ind Est, Deeside, CH5 4DS, United Kingdom
NUTS Code: UKL
The contractor is an SME: No

V.2.4) Information on value of the contract/lot (excluding VAT)
Initial estimated total value of the contract/lot: 7,146.9
Total value of the contract/lot: 7,146.9
Currency: GBP

V.2.5) Information about subcontracting
The contract is likely to be subcontracted: No


Award Of Contract (No.5)

Contract No: Not Provided
Lot Number: Not Provided
Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

A contract/lot is awarded: Yes


V.2) Award of contract

V.2.1) Date of conclusion of the contract: 30/06/2023

V.2.2) Information about tenders
Number of tenders received: 1
Number of tenders received from SMEs: Not Provided
Number of tenders received from tenderers from other EU Member States: Not Provided
Number of tenders received from tenderers from non-EU Member States: Not Provided
Number of tenders received by electronic means: Not Provided

V.2.3) Name and address of the contractor

The contract has been awarded to a group of economic operators: No

Contractor (No.1)
H/T Portland Limited, 08008485
Leanne House 6 Avon Close, Weymouth, DT4 9UX, United Kingdom
NUTS Code: UKK25
The contractor is an SME: Yes

V.2.4) Information on value of the contract/lot (excluding VAT)
Initial estimated total value of the contract/lot: 141.6
Total value of the contract/lot: 141.6
Currency: GBP

V.2.5) Information about subcontracting
The contract is likely to be subcontracted: No


Award Of Contract (No.6)

Contract No: Not Provided
Lot Number: Not Provided
Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

A contract/lot is awarded: Yes


V.2) Award of contract

V.2.1) Date of conclusion of the contract: 30/06/2023

V.2.2) Information about tenders
Number of tenders received: 1
Number of tenders received from SMEs: Not Provided
Number of tenders received from tenderers from other EU Member States: Not Provided
Number of tenders received from tenderers from non-EU Member States: Not Provided
Number of tenders received by electronic means: Not Provided

V.2.3) Name and address of the contractor

The contract has been awarded to a group of economic operators: No

Contractor (No.1)
Machining Technology (Mach-Tech) Ltd, 03513144
Milton Road, Drayton, OX14 4EZ, United Kingdom
NUTS Code: UKJ14
The contractor is an SME: Yes

V.2.4) Information on value of the contract/lot (excluding VAT)
Initial estimated total value of the contract/lot: 6,566.6
Total value of the contract/lot: 6,566.6
Currency: GBP

V.2.5) Information about subcontracting
The contract is likely to be subcontracted: No


Award Of Contract (No.7)

Contract No: Not Provided
Lot Number: Not Provided
Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

A contract/lot is awarded: Yes


V.2) Award of contract

V.2.1) Date of conclusion of the contract: 30/06/2023

V.2.2) Information about tenders
Number of tenders received: 1
Number of tenders received from SMEs: Not Provided
Number of tenders received from tenderers from other EU Member States: Not Provided
Number of tenders received from tenderers from non-EU Member States: Not Provided
Number of tenders received by electronic means: Not Provided

V.2.3) Name and address of the contractor

The contract has been awarded to a group of economic operators: No

Contractor (No.1)
Nortemecanica, A-33771445
Area Industrial de Tabaza I, Asturias, 33469, Spain
NUTS Code: ES112
The contractor is an SME: No

V.2.4) Information on value of the contract/lot (excluding VAT)
Initial estimated total value of the contract/lot: 12,910
Total value of the contract/lot: 12,910
Currency: GBP

V.2.5) Information about subcontracting
The contract is likely to be subcontracted: No


Award Of Contract (No.8)

Contract No: Not Provided
Lot Number: Not Provided
Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

A contract/lot is awarded: Yes


V.2) Award of contract

V.2.1) Date of conclusion of the contract: 30/06/2023

V.2.2) Information about tenders
Number of tenders received: 1
Number of tenders received from SMEs: Not Provided
Number of tenders received from tenderers from other EU Member States: Not Provided
Number of tenders received from tenderers from non-EU Member States: Not Provided
Number of tenders received by electronic means: Not Provided

V.2.3) Name and address of the contractor

The contract has been awarded to a group of economic operators: No

Contractor (No.1)
Oxton Engineering Company Ltd, 01426174
Pexion Limited George Street, Chorley, PR7 2BE, United Kingdom
NUTS Code: UKD47
The contractor is an SME: Yes

V.2.4) Information on value of the contract/lot (excluding VAT)
Initial estimated total value of the contract/lot: 7,178.84
Total value of the contract/lot: 7,178.84
Currency: GBP

V.2.5) Information about subcontracting
The contract is likely to be subcontracted: No


Award Of Contract (No.9)

Contract No: Not Provided
Lot Number: Not Provided
Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

A contract/lot is awarded: Yes


V.2) Award of contract

V.2.1) Date of conclusion of the contract: 30/06/2023

V.2.2) Information about tenders
Number of tenders received: 1
Number of tenders received from SMEs: Not Provided
Number of tenders received from tenderers from other EU Member States: Not Provided
Number of tenders received from tenderers from non-EU Member States: Not Provided
Number of tenders received by electronic means: Not Provided

V.2.3) Name and address of the contractor

The contract has been awarded to a group of economic operators: No

Contractor (No.1)
PM Engineering, 13092725
16 Stirling Road, London, W3 8DJ, United Kingdom
NUTS Code: UKI
The contractor is an SME: No

V.2.4) Information on value of the contract/lot (excluding VAT)
Initial estimated total value of the contract/lot: 5,695
Total value of the contract/lot: 5,695
Currency: GBP

V.2.5) Information about subcontracting
The contract is likely to be subcontracted: No


Award Of Contract (No.10)

Contract No: Not Provided
Lot Number: Not Provided
Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

A contract/lot is awarded: Yes


V.2) Award of contract

V.2.1) Date of conclusion of the contract: 30/06/2023

V.2.2) Information about tenders
Number of tenders received: 1
Number of tenders received from SMEs: Not Provided
Number of tenders received from tenderers from other EU Member States: Not Provided
Number of tenders received from tenderers from non-EU Member States: Not Provided
Number of tenders received by electronic means: Not Provided

V.2.3) Name and address of the contractor

The contract has been awarded to a group of economic operators: No

Contractor (No.1)
Premax Engineering Ltd, 01647761
Unit 8 Swan Lane Industrial, West Bromwich, B70 0NU, United Kingdom
NUTS Code: UKG
The contractor is an SME: No

V.2.4) Information on value of the contract/lot (excluding VAT)
Initial estimated total value of the contract/lot: 3,670
Total value of the contract/lot: 3,670
Currency: GBP

V.2.5) Information about subcontracting
The contract is likely to be subcontracted: No


Award Of Contract (No.11)

Contract No: Not Provided
Lot Number: Not Provided
Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

A contract/lot is awarded: Yes


V.2) Award of contract

V.2.1) Date of conclusion of the contract: 30/06/2023

V.2.2) Information about tenders
Number of tenders received: 1
Number of tenders received from SMEs: Not Provided
Number of tenders received from tenderers from other EU Member States: Not Provided
Number of tenders received from tenderers from non-EU Member States: Not Provided
Number of tenders received by electronic means: Not Provided

V.2.3) Name and address of the contractor

The contract has been awarded to a group of economic operators: No

Contractor (No.1)
Ridgeway Precision Engineering Limited, 07029212
Unit 22 W & G Estate, Challow, Wantage, OX12 9TF, United Kingdom
NUTS Code: UKJ14
The contractor is an SME: No

V.2.4) Information on value of the contract/lot (excluding VAT)
Initial estimated total value of the contract/lot: 4,328.5
Total value of the contract/lot: 4,328.5
Currency: GBP

V.2.5) Information about subcontracting
The contract is likely to be subcontracted: No


Award Of Contract (No.12)

Contract No: Not Provided
Lot Number: Not Provided
Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

A contract/lot is awarded: Yes


V.2) Award of contract

V.2.1) Date of conclusion of the contract: 30/06/2023

V.2.2) Information about tenders
Number of tenders received: 1
Number of tenders received from SMEs: Not Provided
Number of tenders received from tenderers from other EU Member States: Not Provided
Number of tenders received from tenderers from non-EU Member States: Not Provided
Number of tenders received by electronic means: Not Provided

V.2.3) Name and address of the contractor

The contract has been awarded to a group of economic operators: No

Contractor (No.1)
Scanwel Ltd, 01182653
Unit 15 Enterprise Park, Gwynedd, LL23 7NL, United Kingdom
NUTS Code: UKL
The contractor is an SME: Yes

V.2.4) Information on value of the contract/lot (excluding VAT)
Initial estimated total value of the contract/lot: 31,317.05
Total value of the contract/lot: 31,317.05
Currency: GBP

V.2.5) Information about subcontracting
The contract is likely to be subcontracted: No


Award Of Contract (No.13)

Contract No: Not Provided
Lot Number: Not Provided
Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

A contract/lot is awarded: Yes


V.2) Award of contract

V.2.1) Date of conclusion of the contract: 30/06/2023

V.2.2) Information about tenders
Number of tenders received: 1
Number of tenders received from SMEs: Not Provided
Number of tenders received from tenderers from other EU Member States: Not Provided
Number of tenders received from tenderers from non-EU Member States: Not Provided
Number of tenders received by electronic means: Not Provided

V.2.3) Name and address of the contractor

The contract has been awarded to a group of economic operators: No

Contractor (No.1)
TSW Engineers Ltd, 01005663
Unit 1 Plantation Court, Wirral, CH62 3QR, United Kingdom
NUTS Code: UKD74
The contractor is an SME: Yes

V.2.4) Information on value of the contract/lot (excluding VAT)
Initial estimated total value of the contract/lot: 8,233
Total value of the contract/lot: 8,233
Currency: GBP

V.2.5) Information about subcontracting
The contract is likely to be subcontracted: No

Section VI: Complementary information

VI.3) Additional information: To view this notice, please click here:
https://ukri.delta-esourcing.com/delta/viewNotice.html?noticeId=792642966

VI.4) Procedures for review

VI.4.1) Review body
UKRI
Swindon, SN2 1FL, United Kingdom

VI.4.3) Review procedure
Precise information on deadline(s) for review procedures: Not Provided

VI.4.4) Service from which information about the review procedure may be obtained
Not Provided

VI.5) Date of dispatch of this notice: 04/07/2023