UK Research & Innovation: UKRI-1307 Outside Manufacturing Dynamic Purchasing System (OM DPS)

UK-Swindon: Mechanical engineering services.

Section I: Contracting Authority

   I.1) Name, Addresses and Contact Point(s):
       UK Research and Innovation
       Polaris House, North Star Avenue, Swindon, SN2 1FL, United Kingdom
       Tel. +44 1235446100, Email: procurement@stfc.ac.uk
       Contact: UKRI STFC Procurement
       Main Address: https://www.ukri.org
       NUTS Code: UK

   I.2) Joint procurement:
      The contract involves joint procurement: No          
      In the case of joint procurement involving different countries, state applicable national procurement law: Not Provided
      The contract is awarded by a central purchasing body: No

   I.4)Type of the contracting authority:
      Body governed by public law

   I.5) Main activity:
      Other activity: Research and Innovation

Section II: Object Of The Contract

   II.1) Scope of the procurement

      II.1.1) Title: UKRI-1307 Outside Manufacturing Dynamic Purchasing System (OM DPS)            
      Reference number: UKRI-1307

      II.1.2) Main CPV code:
         71333000 - Mechanical engineering services.


      II.1.3) Type of contract: SERVICES

      II.1.4) Short description: STFC, procure a considerable number of mechanical engineering bespoke and low volume production items during a year. Precision manufacture and sub assembly services are required to assist delivery on demanding engineering projects. To support this activity, UKRI intend to establish a Dynamic Purchasing System (DPS) for the provision of Outside Manufacturing (OM).The DPS will be divided into Lots according to the different manufacturing categories, as summarised below: Lot 1: Small/Medium Machining Lot 2: Large Machining Lot 3: RAL Space Machining Lot 4: Electro Discharge Machining (EDM) Lot 5: Small/Medium Fabrication Lot 6: Large Fabrication Lot 7: Vacuum Fabrication - General Lot 8: Vacuum Fabrication - RAL Lot 9: Vacuum Fabrication – DL Astec Lot 10: Additive Manufacture – (3D Printing) Plastic. Lot 11: Additive Manufacture – (3D printing) Metallic

      II.1.6) Information about lots
         This contract is divided into lots: Yes
                                                                                    
      II.1.7) Total value of the procurement (excluding VAT)
          Value: 109,018.49
                  
         Currency:GBP            

   II.2) Description (lot no. 1)
   

      II.2.1) Title:Lot 1: Small/Medium Machining   
      Lot No:Lot 1

      II.2.2) Additional CPV code(s):
            71333000 - Mechanical engineering services.


      II.2.3) Place of performance
      Nuts code:
      UK - UNITED KINGDOM
   
      Main site or place of performance:
      UNITED KINGDOM
             

      II.2.4) Description of the procurement: Lot 1: Small/Medium Machining

      II.2.5) Award criteria:
       Not Provided

      II.2.11) Information about options
         Options: Yes
         Description of these options:This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.

It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.

      II.2.13) Information about European Union funds
         The procurement is related to a project and/or programme financed by European Union funds: No
         

      II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here:
Lot 1: Small/Medium Machining Access Code:Q597GZADPB

   II.2) Description (lot no. 2)
   

      II.2.1) Title:Lot 2: Large Machining   
      Lot No:Lot 2

      II.2.2) Additional CPV code(s):
            71333000 - Mechanical engineering services.


      II.2.3) Place of performance
      Nuts code:
      UK - UNITED KINGDOM
   
      Main site or place of performance:
      UNITED KINGDOM
             

      II.2.4) Description of the procurement: Lot 2: Large Machining

      II.2.5) Award criteria:
       Not Provided

      II.2.11) Information about options
         Options: Yes
         Description of these options:This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.

It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.

      II.2.13) Information about European Union funds
         The procurement is related to a project and/or programme financed by European Union funds: No
         

      II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here:
Lot 2: Large Machining Access Code:6GPFN76R33

   II.2) Description (lot no. 3)
   

      II.2.1) Title:Lot 3: RAL Space Machining   
      Lot No:Lot 3

      II.2.2) Additional CPV code(s):
            71333000 - Mechanical engineering services.


      II.2.3) Place of performance
      Nuts code:
      UK - UNITED KINGDOM
   
      Main site or place of performance:
      UNITED KINGDOM
             

      II.2.4) Description of the procurement: Lot 3: RAL Space Machining

      II.2.5) Award criteria:
       Not Provided

      II.2.11) Information about options
         Options: Yes
         Description of these options:This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.
It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.

      II.2.13) Information about European Union funds
         The procurement is related to a project and/or programme financed by European Union funds: No
         

      II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here:
Lot 3: RAL Space Machining Access Code:79E5QRB95C

   II.2) Description (lot no. 4)
   

      II.2.1) Title:Lot 4: Electro Discharge Machining (EDM)   
      Lot No:Lot 4

      II.2.2) Additional CPV code(s):
            71333000 - Mechanical engineering services.


      II.2.3) Place of performance
      Nuts code:
      UK - UNITED KINGDOM
   
      Main site or place of performance:
      UNITED KINGDOM
             

      II.2.4) Description of the procurement: Lot 4: Electro Discharge Machining (EDM)

      II.2.5) Award criteria:
       Not Provided

      II.2.11) Information about options
         Options: Yes
         Description of these options:This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.

It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.

      II.2.13) Information about European Union funds
         The procurement is related to a project and/or programme financed by European Union funds: No
         

      II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here:
Lot 4: Electro Discharge Machining (EDM) Access Code:M7B7V7D757

   II.2) Description (lot no. 5)
   

      II.2.1) Title:Lot 5: Small/Medium Fabrication   
      Lot No:Lot 5

      II.2.2) Additional CPV code(s):
            71333000 - Mechanical engineering services.


      II.2.3) Place of performance
      Nuts code:
      UK - UNITED KINGDOM
   
      Main site or place of performance:
      UNITED KINGDOM
             

      II.2.4) Description of the procurement: Lot 5: Small/Medium Fabrication

      II.2.5) Award criteria:
       Not Provided

      II.2.11) Information about options
         Options: Yes
         Description of these options:This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.
It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.

      II.2.13) Information about European Union funds
         The procurement is related to a project and/or programme financed by European Union funds: No
         

      II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here:
Lot 5: Small/Medium Fabrication Access Code:PHA8D7XZ29

   II.2) Description (lot no. 6)
   

      II.2.1) Title:Lot 6: Large Fabrication   
      Lot No:Lot 6

      II.2.2) Additional CPV code(s):
            71333000 - Mechanical engineering services.


      II.2.3) Place of performance
      Nuts code:
      UK - UNITED KINGDOM
   
      Main site or place of performance:
      UNITED KINGDOM
             

      II.2.4) Description of the procurement: Lot 6: Large Fabrication

      II.2.5) Award criteria:
       Not Provided

      II.2.11) Information about options
         Options: Yes
         Description of these options:This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.
It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so

      II.2.13) Information about European Union funds
         The procurement is related to a project and/or programme financed by European Union funds: No
         

      II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here:
Lot 6: Large Fabrication Access Code:52F22XQMV9

   II.2) Description (lot no. 7)
   

      II.2.1) Title:Lot 7: Vacuum Fabrication – General   
      Lot No:Lot 7

      II.2.2) Additional CPV code(s):
            71333000 - Mechanical engineering services.


      II.2.3) Place of performance
      Nuts code:
      UK - UNITED KINGDOM
   
      Main site or place of performance:
      UNITED KINGDOM
             

      II.2.4) Description of the procurement: Lot 7: Vacuum Fabrication – General

      II.2.5) Award criteria:
                  
      Price - Weighting: 10
            

      II.2.11) Information about options
         Options: Yes
         Description of these options:This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration. It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.

      II.2.13) Information about European Union funds
         The procurement is related to a project and/or programme financed by European Union funds: No
         

      II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/ Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here: Lot 7: Vacuum Fabrication – General Access Code:244R92926T

   II.2) Description (lot no. 8)
   

      II.2.1) Title:Lot 8: Vacuum Fabrication – RAL   
      Lot No:Lot 8

      II.2.2) Additional CPV code(s):
            71333000 - Mechanical engineering services.


      II.2.3) Place of performance
      Nuts code:
      UK - UNITED KINGDOM
   
      Main site or place of performance:
      UNITED KINGDOM
             

      II.2.4) Description of the procurement: Lot 8: Vacuum Fabrication – RAL

      II.2.5) Award criteria:
       Not Provided

      II.2.11) Information about options
         Options: Yes
         Description of these options:This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration. It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.

      II.2.13) Information about European Union funds
         The procurement is related to a project and/or programme financed by European Union funds: No
         

      II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/ Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here: Lot 8: Vacuum Fabrication – RAL Access Code:68669C8C8J

   II.2) Description (lot no. 9)
   

      II.2.1) Title:Lot 9: Vacuum Fabrication – DL Astec   
      Lot No:Lot 9

      II.2.2) Additional CPV code(s):
            71333000 - Mechanical engineering services.


      II.2.3) Place of performance
      Nuts code:
      UK - UNITED KINGDOM
   
      Main site or place of performance:
      UNITED KINGDOM
             

      II.2.4) Description of the procurement: Lot 9: Vacuum Fabrication – DL Astec

      II.2.5) Award criteria:
                  
      Price - Weighting: 10
            

      II.2.11) Information about options
         Options: Yes
         Description of these options:This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration. It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.

      II.2.13) Information about European Union funds
         The procurement is related to a project and/or programme financed by European Union funds: No
         

      II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/ Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here: Lot 9: Vacuum Fabrication – DL Astec Access Code:XQ3JR9D6ZV

   II.2) Description (lot no. 10)
   

      II.2.1) Title:Lot 10: Additive Manufacture – (3D Printing) Plastic   
      Lot No:Lot 10

      II.2.2) Additional CPV code(s):
            71333000 - Mechanical engineering services.


      II.2.3) Place of performance
      Nuts code:
      UK - UNITED KINGDOM
   
      Main site or place of performance:
      UNITED KINGDOM
             

      II.2.4) Description of the procurement: Lot 10: Additive Manufacture – (3D Printing) Plastic

      II.2.5) Award criteria:
       Not Provided

      II.2.11) Information about options
         Options: Yes
         Description of these options:This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.
It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.

      II.2.13) Information about European Union funds
         The procurement is related to a project and/or programme financed by European Union funds: No
         

      II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for - provided here:
Lot 10: Additive Manufacture – (3D Printing) Plastic Access Code:4NTBAA68F8

   II.2) Description (lot no. 11)
   

      II.2.1) Title:Lot 11: Additive Manufacture – (3D printing) Metallic   
      Lot No:Lot 11

      II.2.2) Additional CPV code(s):
            71333000 - Mechanical engineering services.


      II.2.3) Place of performance
      Nuts code:
      UK - UNITED KINGDOM
   
      Main site or place of performance:
      UNITED KINGDOM
             

      II.2.4) Description of the procurement: Lot 11: Additive Manufacture – (3D printing) Metallic

      II.2.5) Award criteria:
       Not Provided

      II.2.11) Information about options
         Options: Yes
         Description of these options:This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.
It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.

      II.2.13) Information about European Union funds
         The procurement is related to a project and/or programme financed by European Union funds: No
         

      II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for - provided here:
Lot 11: Additive Manufacture – (3D printing) Metallic Access Code:YR5783E5T6


Section IV: Procedure

IV.1) Description

   IV.1.1)Type of procedure: Restricted


   IV.1.3) Information about a framework agreement or a dynamic purchasing system
      The procurement involves the establishment of a framework agreement: No       
      A dynamic purchasing system was set up: Yes

   IV.1.6) Information about electronic auction
      An electronic auction has been used: No

   IV.1.8) Information about the Government Procurement Agreement (GPA)
      The procurement is covered by the Government Procurement Agreement: Yes

IV.2) Administrative information

   IV.2.1) Previous publication concerning this procedure
       Notice number in the OJEU: 2022/S 000-036319
      
   IV.2.8) Information about termination of dynamic purchasing system
      The notice involves the termination of the dynamic purchasing system published by the above contract notice: No

   IV.2.9) Information about termination of call for competition in the form of a prior information notice
      The contracting authority will not award any further contracts based on the above prior information notice: No

Section V: Award of contract

Award Of Contract (No.1)

   Contract No: UKRI-1307    
   Lot Number: Not Provided    
   Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

   A contract/lot is awarded: Yes


   V.2) Award of contract

      V.2.1) Date of conclusion of the contract: 30/06/2023

      V.2.2) Information about tenders
         Number of tenders received: 1
         Number of tenders received from SMEs: Not Provided          
         Number of tenders received from tenderers from other EU Member States: Not Provided          
         Number of tenders received from tenderers from non-EU Member States: Not Provided          
         Number of tenders received by electronic means: Not Provided

      V.2.3) Name and address of the contractor

      The contract has been awarded to a group of economic operators: No
         
         Contractor (No.1)
             Atlantic Precision Engineering Ltd, 02448830
             Sovereign House,, 155 High Street, Aldershot, GU11 1TT, United Kingdom
             NUTS Code: UKJ36
            The contractor is an SME: Yes

      V.2.4) Information on value of the contract/lot (excluding VAT)
         Initial estimated total value of the contract/lot: 7,476          
         Total value of the contract/lot: 7,476
         Currency: GBP

      V.2.5) Information about subcontracting
         The contract is likely to be subcontracted: No
         

Award Of Contract (No.2)

   Contract No: Not Provided    
   Lot Number: Not Provided    
   Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

   A contract/lot is awarded: Yes


   V.2) Award of contract

      V.2.1) Date of conclusion of the contract: 30/06/2023

      V.2.2) Information about tenders
         Number of tenders received: 1
         Number of tenders received from SMEs: Not Provided          
         Number of tenders received from tenderers from other EU Member States: Not Provided          
         Number of tenders received from tenderers from non-EU Member States: Not Provided          
         Number of tenders received by electronic means: Not Provided

      V.2.3) Name and address of the contractor

      The contract has been awarded to a group of economic operators: No
         
         Contractor (No.1)
             Atomic Precision Ltd, 12301683
             39 Blenheim Gardens, Wantage, OX12 0NP, United Kingdom
             NUTS Code: UKJ14
            The contractor is an SME: Yes

      V.2.4) Information on value of the contract/lot (excluding VAT)
         Initial estimated total value of the contract/lot: 1,440          
         Total value of the contract/lot: 1,440
         Currency: GBP

      V.2.5) Information about subcontracting
         The contract is likely to be subcontracted: No
         

Award Of Contract (No.3)

   Contract No: Not Provided    
   Lot Number: Not Provided    
   Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

   A contract/lot is awarded: Yes


   V.2) Award of contract

      V.2.1) Date of conclusion of the contract: 30/06/2023

      V.2.2) Information about tenders
         Number of tenders received: 1
         Number of tenders received from SMEs: Not Provided          
         Number of tenders received from tenderers from other EU Member States: Not Provided          
         Number of tenders received from tenderers from non-EU Member States: Not Provided          
         Number of tenders received by electronic means: Not Provided

      V.2.3) Name and address of the contractor

      The contract has been awarded to a group of economic operators: No
         
         Contractor (No.1)
             Beechwood Engineering Ltd, 03215223
             Cocker Avenue, Lancashire, FY6 8JU, United Kingdom
             NUTS Code: UKD4
            The contractor is an SME: Yes

      V.2.4) Information on value of the contract/lot (excluding VAT)
         Initial estimated total value of the contract/lot: 12,915          
         Total value of the contract/lot: 12,915
         Currency: GBP

      V.2.5) Information about subcontracting
         The contract is likely to be subcontracted: No
         

Award Of Contract (No.4)

   Contract No: Not Provided    
   Lot Number: Not Provided    
   Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

   A contract/lot is awarded: Yes


   V.2) Award of contract

      V.2.1) Date of conclusion of the contract: 30/06/2023

      V.2.2) Information about tenders
         Number of tenders received: 1
         Number of tenders received from SMEs: Not Provided          
         Number of tenders received from tenderers from other EU Member States: Not Provided          
         Number of tenders received from tenderers from non-EU Member States: Not Provided          
         Number of tenders received by electronic means: Not Provided

      V.2.3) Name and address of the contractor

      The contract has been awarded to a group of economic operators: No
         
         Contractor (No.1)
             GJ Maintenance Engineering Ltd, 07484508
             Dock Road Ind Est, Deeside, CH5 4DS, United Kingdom
             NUTS Code: UKL
            The contractor is an SME: No

      V.2.4) Information on value of the contract/lot (excluding VAT)
         Initial estimated total value of the contract/lot: 7,146.9          
         Total value of the contract/lot: 7,146.9
         Currency: GBP

      V.2.5) Information about subcontracting
         The contract is likely to be subcontracted: No
         

Award Of Contract (No.5)

   Contract No: Not Provided    
   Lot Number: Not Provided    
   Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

   A contract/lot is awarded: Yes


   V.2) Award of contract

      V.2.1) Date of conclusion of the contract: 30/06/2023

      V.2.2) Information about tenders
         Number of tenders received: 1
         Number of tenders received from SMEs: Not Provided          
         Number of tenders received from tenderers from other EU Member States: Not Provided          
         Number of tenders received from tenderers from non-EU Member States: Not Provided          
         Number of tenders received by electronic means: Not Provided

      V.2.3) Name and address of the contractor

      The contract has been awarded to a group of economic operators: No
         
         Contractor (No.1)
             H/T Portland Limited, 08008485
             Leanne House 6 Avon Close, Weymouth, DT4 9UX, United Kingdom
             NUTS Code: UKK25
            The contractor is an SME: Yes

      V.2.4) Information on value of the contract/lot (excluding VAT)
         Initial estimated total value of the contract/lot: 141.6          
         Total value of the contract/lot: 141.6
         Currency: GBP

      V.2.5) Information about subcontracting
         The contract is likely to be subcontracted: No
         

Award Of Contract (No.6)

   Contract No: Not Provided    
   Lot Number: Not Provided    
   Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

   A contract/lot is awarded: Yes


   V.2) Award of contract

      V.2.1) Date of conclusion of the contract: 30/06/2023

      V.2.2) Information about tenders
         Number of tenders received: 1
         Number of tenders received from SMEs: Not Provided          
         Number of tenders received from tenderers from other EU Member States: Not Provided          
         Number of tenders received from tenderers from non-EU Member States: Not Provided          
         Number of tenders received by electronic means: Not Provided

      V.2.3) Name and address of the contractor

      The contract has been awarded to a group of economic operators: No
         
         Contractor (No.1)
             Machining Technology (Mach-Tech) Ltd, 03513144
             Milton Road, Drayton, OX14 4EZ, United Kingdom
             NUTS Code: UKJ14
            The contractor is an SME: Yes

      V.2.4) Information on value of the contract/lot (excluding VAT)
         Initial estimated total value of the contract/lot: 6,566.6          
         Total value of the contract/lot: 6,566.6
         Currency: GBP

      V.2.5) Information about subcontracting
         The contract is likely to be subcontracted: No
         

Award Of Contract (No.7)

   Contract No: Not Provided    
   Lot Number: Not Provided    
   Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

   A contract/lot is awarded: Yes


   V.2) Award of contract

      V.2.1) Date of conclusion of the contract: 30/06/2023

      V.2.2) Information about tenders
         Number of tenders received: 1
         Number of tenders received from SMEs: Not Provided          
         Number of tenders received from tenderers from other EU Member States: Not Provided          
         Number of tenders received from tenderers from non-EU Member States: Not Provided          
         Number of tenders received by electronic means: Not Provided

      V.2.3) Name and address of the contractor

      The contract has been awarded to a group of economic operators: No
         
         Contractor (No.1)
             Nortemecanica, A-33771445
             Area Industrial de Tabaza I, Asturias, 33469, Spain
             NUTS Code: ES112
            The contractor is an SME: No

      V.2.4) Information on value of the contract/lot (excluding VAT)
         Initial estimated total value of the contract/lot: 12,910          
         Total value of the contract/lot: 12,910
         Currency: GBP

      V.2.5) Information about subcontracting
         The contract is likely to be subcontracted: No
         

Award Of Contract (No.8)

   Contract No: Not Provided    
   Lot Number: Not Provided    
   Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

   A contract/lot is awarded: Yes


   V.2) Award of contract

      V.2.1) Date of conclusion of the contract: 30/06/2023

      V.2.2) Information about tenders
         Number of tenders received: 1
         Number of tenders received from SMEs: Not Provided          
         Number of tenders received from tenderers from other EU Member States: Not Provided          
         Number of tenders received from tenderers from non-EU Member States: Not Provided          
         Number of tenders received by electronic means: Not Provided

      V.2.3) Name and address of the contractor

      The contract has been awarded to a group of economic operators: No
         
         Contractor (No.1)
             Oxton Engineering Company Ltd, 01426174
             Pexion Limited George Street, Chorley, PR7 2BE, United Kingdom
             NUTS Code: UKD47
            The contractor is an SME: Yes

      V.2.4) Information on value of the contract/lot (excluding VAT)
         Initial estimated total value of the contract/lot: 7,178.84          
         Total value of the contract/lot: 7,178.84
         Currency: GBP

      V.2.5) Information about subcontracting
         The contract is likely to be subcontracted: No
         

Award Of Contract (No.9)

   Contract No: Not Provided    
   Lot Number: Not Provided    
   Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

   A contract/lot is awarded: Yes


   V.2) Award of contract

      V.2.1) Date of conclusion of the contract: 30/06/2023

      V.2.2) Information about tenders
         Number of tenders received: 1
         Number of tenders received from SMEs: Not Provided          
         Number of tenders received from tenderers from other EU Member States: Not Provided          
         Number of tenders received from tenderers from non-EU Member States: Not Provided          
         Number of tenders received by electronic means: Not Provided

      V.2.3) Name and address of the contractor

      The contract has been awarded to a group of economic operators: No
         
         Contractor (No.1)
             PM Engineering, 13092725
             16 Stirling Road, London, W3 8DJ, United Kingdom
             NUTS Code: UKI
            The contractor is an SME: No

      V.2.4) Information on value of the contract/lot (excluding VAT)
         Initial estimated total value of the contract/lot: 5,695          
         Total value of the contract/lot: 5,695
         Currency: GBP

      V.2.5) Information about subcontracting
         The contract is likely to be subcontracted: No
         

Award Of Contract (No.10)

   Contract No: Not Provided    
   Lot Number: Not Provided    
   Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

   A contract/lot is awarded: Yes


   V.2) Award of contract

      V.2.1) Date of conclusion of the contract: 30/06/2023

      V.2.2) Information about tenders
         Number of tenders received: 1
         Number of tenders received from SMEs: Not Provided          
         Number of tenders received from tenderers from other EU Member States: Not Provided          
         Number of tenders received from tenderers from non-EU Member States: Not Provided          
         Number of tenders received by electronic means: Not Provided

      V.2.3) Name and address of the contractor

      The contract has been awarded to a group of economic operators: No
         
         Contractor (No.1)
             Premax Engineering Ltd, 01647761
             Unit 8 Swan Lane Industrial, West Bromwich, B70 0NU, United Kingdom
             NUTS Code: UKG
            The contractor is an SME: No

      V.2.4) Information on value of the contract/lot (excluding VAT)
         Initial estimated total value of the contract/lot: 3,670          
         Total value of the contract/lot: 3,670
         Currency: GBP

      V.2.5) Information about subcontracting
         The contract is likely to be subcontracted: No
         

Award Of Contract (No.11)

   Contract No: Not Provided    
   Lot Number: Not Provided    
   Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

   A contract/lot is awarded: Yes


   V.2) Award of contract

      V.2.1) Date of conclusion of the contract: 30/06/2023

      V.2.2) Information about tenders
         Number of tenders received: 1
         Number of tenders received from SMEs: Not Provided          
         Number of tenders received from tenderers from other EU Member States: Not Provided          
         Number of tenders received from tenderers from non-EU Member States: Not Provided          
         Number of tenders received by electronic means: Not Provided

      V.2.3) Name and address of the contractor

      The contract has been awarded to a group of economic operators: No
         
         Contractor (No.1)
             Ridgeway Precision Engineering Limited, 07029212
             Unit 22 W & G Estate, Challow, Wantage, OX12 9TF, United Kingdom
             NUTS Code: UKJ14
            The contractor is an SME: No

      V.2.4) Information on value of the contract/lot (excluding VAT)
         Initial estimated total value of the contract/lot: 4,328.5          
         Total value of the contract/lot: 4,328.5
         Currency: GBP

      V.2.5) Information about subcontracting
         The contract is likely to be subcontracted: No
         

Award Of Contract (No.12)

   Contract No: Not Provided    
   Lot Number: Not Provided    
   Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

   A contract/lot is awarded: Yes


   V.2) Award of contract

      V.2.1) Date of conclusion of the contract: 30/06/2023

      V.2.2) Information about tenders
         Number of tenders received: 1
         Number of tenders received from SMEs: Not Provided          
         Number of tenders received from tenderers from other EU Member States: Not Provided          
         Number of tenders received from tenderers from non-EU Member States: Not Provided          
         Number of tenders received by electronic means: Not Provided

      V.2.3) Name and address of the contractor

      The contract has been awarded to a group of economic operators: No
         
         Contractor (No.1)
             Scanwel Ltd, 01182653
             Unit 15 Enterprise Park, Gwynedd, LL23 7NL, United Kingdom
             NUTS Code: UKL
            The contractor is an SME: Yes

      V.2.4) Information on value of the contract/lot (excluding VAT)
         Initial estimated total value of the contract/lot: 31,317.05          
         Total value of the contract/lot: 31,317.05
         Currency: GBP

      V.2.5) Information about subcontracting
         The contract is likely to be subcontracted: No
         

Award Of Contract (No.13)

   Contract No: Not Provided    
   Lot Number: Not Provided    
   Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

   A contract/lot is awarded: Yes


   V.2) Award of contract

      V.2.1) Date of conclusion of the contract: 30/06/2023

      V.2.2) Information about tenders
         Number of tenders received: 1
         Number of tenders received from SMEs: Not Provided          
         Number of tenders received from tenderers from other EU Member States: Not Provided          
         Number of tenders received from tenderers from non-EU Member States: Not Provided          
         Number of tenders received by electronic means: Not Provided

      V.2.3) Name and address of the contractor

      The contract has been awarded to a group of economic operators: No
         
         Contractor (No.1)
             TSW Engineers Ltd, 01005663
             Unit 1 Plantation Court, Wirral, CH62 3QR, United Kingdom
             NUTS Code: UKD74
            The contractor is an SME: Yes

      V.2.4) Information on value of the contract/lot (excluding VAT)
         Initial estimated total value of the contract/lot: 8,233          
         Total value of the contract/lot: 8,233
         Currency: GBP

      V.2.5) Information about subcontracting
         The contract is likely to be subcontracted: No
         
Section VI: Complementary information

   VI.3) Additional information: To view this notice, please click here:
https://ukri.delta-esourcing.com/delta/viewNotice.html?noticeId=792642966

   VI.4) Procedures for review

      VI.4.1) Review body
          UKRI
          Swindon, SN2 1FL, United Kingdom

      VI.4.3) Review procedure
         Precise information on deadline(s) for review procedures: Not Provided

      VI.4.4) Service from which information about the review procedure may be obtained
         Not Provided

   VI.5) Date of dispatch of this notice: 04/07/2023