Skip to main content.

UK Research & Innovation: UKRI-1307 Outside Manufacturing Dynamic Purchasing System (OM DPS)

  UK Research & Innovation is using Delta eSourcing to run this tender exercise

Notice Summary
Title: UKRI-1307 Outside Manufacturing Dynamic Purchasing System (OM DPS)
Notice type: Contract Notice
Authority: UK Research & Innovation
Nature of contract: Services
Procedure: Restricted
Short Description: STFC, procure a considerable number of mechanical engineering bespoke and low volume production items during a year. Precision manufacture and sub assembly services are required to assist delivery on demanding engineering projects. To support this activity, UKRI intend to establish a Dynamic Purchasing System (DPS) for the provision of Outside Manufacturing (OM).The DPS will be divided into Lots according to the different manufacturing categories, as summarised below: Lot 1: Small/Medium Machining Lot 2: Large Machining Lot 3: RAL Space Machining Lot 4: Electro Discharge Machining (EDM) Lot 5: Small/Medium Fabrication Lot 6: Large Fabrication Lot 7: Vacuum Fabrication - General Lot 8: Vacuum Fabrication - RAL Lot 9: Vacuum Fabrication – DL Astec Lot 10: Additive Manufacture – (3D Printing) Plastic. Lot 11: Additive Manufacture – (3D printing) Metallic
Published: 01/11/2021 11:44
This opportunity is currently OPEN. To respond to the opportunity, please click Register Interest and follow the on-screen instructions.

View Full Notice

UK-Swindon: Mechanical engineering services.
Section I: Contracting Authority
      I.1) Name and addresses
             UK Research and Innovation
             Polaris House, North Star Avenue, Swindon, SN2 1FL, United Kingdom
             Tel. +44 1235446100, Email: procurement@stfc.ac.uk
             Contact: UKRI STFC Procurement
             Main Address: https://www.ukri.org
             NUTS Code: UK
      I.2) Joint procurement
      The contract involves joint procurement: No.
      In the case of joint procurement involving different countries, state applicable national procurement law: Not provided       
      The contract is awarded by a central purchasing body: No.
      I.3) Communication
      The procurement documents are available for unrestricted and full direct access, free of charge, at: https://www.delta-esourcing.com/tenders/UK-UK-Swindon:-Mechanical-engineering-services./Q597GZADPB
      Additional information can be obtained from: the abovementioned address
      Tenders or requests to participate must be sent to the abovementioned address       
      Electronic communication requires the use of tools and devices that are not generally available. Unrestricted and full direct access to these tools and devices is possible, free of charge, at: Not provided
      I.4) Type of the contracting authority
            Body governed by public law
      I.5) Main activity
            Other activity:

Section II: Object
II.1) Scope of the procurement
      II.1.1) Title: UKRI-1307 Outside Manufacturing Dynamic Purchasing System (OM DPS)       
      Reference Number: UKRI-1307
      II.1.2) Main CPV Code:
      71333000 - Mechanical engineering services.

      II.1.3) Type of contract: SERVICES
      II.1.4) Short description: STFC, procure a considerable number of mechanical engineering bespoke and low volume production items during a year. Precision manufacture and sub assembly services are required to assist delivery on demanding engineering projects. To support this activity, UKRI intend to establish a Dynamic Purchasing System (DPS) for the provision of Outside Manufacturing (OM).The DPS will be divided into Lots according to the different manufacturing categories, as summarised below:
Lot 1: Small/Medium Machining
Lot 2: Large Machining
Lot 3: RAL Space Machining
Lot 4: Electro Discharge Machining (EDM)
Lot 5: Small/Medium Fabrication
Lot 6: Large Fabrication
Lot 7: Vacuum Fabrication - General
Lot 8: Vacuum Fabrication - RAL
Lot 9: Vacuum Fabrication – DL Astec
Lot 10: Additive Manufacture – (3D Printing) Plastic.
Lot 11: Additive Manufacture – (3D printing) Metallic       
      II.1.5) Estimated total value:
      Value excluding VAT: 9,000,000       
      Currency: GBP
      II.1.6) Information about lots:
      This contract is divided into lots: Yes       
      Tenders may be submitted for: All lots
      Maximum number of lots that may be awarded to one tenderer: Not provided
      The contracting authority reserves the right to award contracts combining the following lots or groups of lots: Not provided

II.2) Description
II.2) Description Lot No. 1
      
      II.2.1) Title: Lot 1: Small/Medium Machining       
      Lot No: Lot 1       
      II.2.2) Additional CPV codes:
      71333000 - Mechanical engineering services.
      
      II.2.3) Place of performance:
      UK UNITED KINGDOM
      
      II.2.4) Description of procurement: Lot 1: Small/Medium Machining
      II.2.5) Award criteria:
            Price is not the only award criterion and all criteria are stated only in the procurement documents            
      II.2.6) Estimated value:
      Value excluding VAT: Not provided       
      Currency: Not provided       
      II.2.7) Duration of the contract, framework agreement or dynamic purchasing system:
      Duration in months: 12       
      This contract is subject to renewal: No       
      Description of renewals: Not provided
      II.2.9) Information about the limits on the number of candidates to be invited:
             Envisaged minimum number: 1
             
      Objective criteria for choosing the limited number of candidates: Not provided
      II.2.10) Information about variants:
      Variants will be accepted: No
      II.2.11) Information about options:
      Options:       Yes             
      Description of options: This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.

It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.
      II.2.12) Information about electronic catalogues:
      Tenders must be presented in the form of electronic catalogues or include an electronic catalogue: No
      II.2.13) Information about European Union funds:
      The procurement is related to a project and/or programme financed by European Union funds: No       
      Identification of the project: Not provided             
      II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here:
Lot 1: Small/Medium Machining Access Code:Q597GZADPB       
II.2) Description Lot No. 2
      
      II.2.1) Title: Lot 2: Large Machining       
      Lot No: Lot 2       
      II.2.2) Additional CPV codes:
      71333000 - Mechanical engineering services.
      
      II.2.3) Place of performance:
      UK UNITED KINGDOM
      
      II.2.4) Description of procurement: Lot 2: Large Machining
      II.2.5) Award criteria:
            Price is not the only award criterion and all criteria are stated only in the procurement documents            
      II.2.6) Estimated value:
      Value excluding VAT: Not provided       
      Currency: Not provided       
      II.2.7) Duration of the contract, framework agreement or dynamic purchasing system:
      Duration in months: 12       
      This contract is subject to renewal: No       
      Description of renewals: Not provided
      II.2.9) Information about the limits on the number of candidates to be invited:
       Not provided
      Objective criteria for choosing the limited number of candidates: Not provided
      II.2.10) Information about variants:
      Variants will be accepted: No
      II.2.11) Information about options:
      Options:       Yes             
      Description of options: This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.

It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.
      II.2.12) Information about electronic catalogues:
      Tenders must be presented in the form of electronic catalogues or include an electronic catalogue: No
      II.2.13) Information about European Union funds:
      The procurement is related to a project and/or programme financed by European Union funds: No       
      Identification of the project: Not provided             
      II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here:
Lot 2: Large Machining Access Code:6GPFN76R33       
II.2) Description Lot No. 3
      
      II.2.1) Title: Lot 3: RAL Space Machining       
      Lot No: Lot 3       
      II.2.2) Additional CPV codes:
      71333000 - Mechanical engineering services.
      
      II.2.3) Place of performance:
      UK UNITED KINGDOM
      
      II.2.4) Description of procurement: Lot 3: RAL Space Machining
      II.2.5) Award criteria:
            Price is not the only award criterion and all criteria are stated only in the procurement documents            
      II.2.6) Estimated value:
      Value excluding VAT: Not provided       
      Currency: Not provided       
      II.2.7) Duration of the contract, framework agreement or dynamic purchasing system:
      Duration in months: 12       
      This contract is subject to renewal: No       
      Description of renewals: Not provided
      II.2.9) Information about the limits on the number of candidates to be invited:
       Not provided
      Objective criteria for choosing the limited number of candidates: Not provided
      II.2.10) Information about variants:
      Variants will be accepted: No
      II.2.11) Information about options:
      Options:       Yes             
      Description of options: This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.
It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.
      II.2.12) Information about electronic catalogues:
      Tenders must be presented in the form of electronic catalogues or include an electronic catalogue: No
      II.2.13) Information about European Union funds:
      The procurement is related to a project and/or programme financed by European Union funds: No       
      Identification of the project: Not provided             
      II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here:
Lot 3: RAL Space Machining Access Code:79E5QRB95C       
II.2) Description Lot No. 4
      
      II.2.1) Title: Lot 4: Electro Discharge Machining (EDM)       
      Lot No: Lot 4       
      II.2.2) Additional CPV codes:
      71333000 - Mechanical engineering services.
      
      II.2.3) Place of performance:
      UK UNITED KINGDOM
      
      II.2.4) Description of procurement: Lot 4: Electro Discharge Machining (EDM)
      II.2.5) Award criteria:
            Price is not the only award criterion and all criteria are stated only in the procurement documents            
      II.2.6) Estimated value:
      Value excluding VAT: Not provided       
      Currency: Not provided       
      II.2.7) Duration of the contract, framework agreement or dynamic purchasing system:
      Duration in months: 12       
      This contract is subject to renewal: No       
      Description of renewals: Not provided
      II.2.9) Information about the limits on the number of candidates to be invited:
       Not provided
      Objective criteria for choosing the limited number of candidates: Not provided
      II.2.10) Information about variants:
      Variants will be accepted: No
      II.2.11) Information about options:
      Options:       Yes             
      Description of options: This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.

It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.
      II.2.12) Information about electronic catalogues:
      Tenders must be presented in the form of electronic catalogues or include an electronic catalogue: No
      II.2.13) Information about European Union funds:
      The procurement is related to a project and/or programme financed by European Union funds: No       
      Identification of the project: Not provided             
      II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here:
Lot 4: Electro Discharge Machining (EDM) Access Code:M7B7V7D757       
II.2) Description Lot No. 5
      
      II.2.1) Title: Lot 5: Small/Medium Fabrication       
      Lot No: Lot 5       
      II.2.2) Additional CPV codes:
      71333000 - Mechanical engineering services.
      
      II.2.3) Place of performance:
      UK UNITED KINGDOM
      
      II.2.4) Description of procurement: Lot 5: Small/Medium Fabrication
      II.2.5) Award criteria:
            Price is not the only award criterion and all criteria are stated only in the procurement documents            
      II.2.6) Estimated value:
      Value excluding VAT: Not provided       
      Currency: Not provided       
      II.2.7) Duration of the contract, framework agreement or dynamic purchasing system:
      Duration in months: 12       
      This contract is subject to renewal: No       
      Description of renewals: Not provided
      II.2.9) Information about the limits on the number of candidates to be invited:
       Not provided
      Objective criteria for choosing the limited number of candidates: Not provided
      II.2.10) Information about variants:
      Variants will be accepted: No
      II.2.11) Information about options:
      Options:       Yes             
      Description of options: This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.
It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.
      II.2.12) Information about electronic catalogues:
      Tenders must be presented in the form of electronic catalogues or include an electronic catalogue: No
      II.2.13) Information about European Union funds:
      The procurement is related to a project and/or programme financed by European Union funds: No       
      Identification of the project: Not provided             
      II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here:
Lot 5: Small/Medium Fabrication Access Code:PHA8D7XZ29       
II.2) Description Lot No. 6
      
      II.2.1) Title: Lot 6: Large Fabrication       
      Lot No: Lot 6       
      II.2.2) Additional CPV codes:
      71333000 - Mechanical engineering services.
      
      II.2.3) Place of performance:
      UK UNITED KINGDOM
      
      II.2.4) Description of procurement: Lot 6: Large Fabrication
      II.2.5) Award criteria:
            Price is not the only award criterion and all criteria are stated only in the procurement documents            
      II.2.6) Estimated value:
      Value excluding VAT: Not provided       
      Currency: Not provided       
      II.2.7) Duration of the contract, framework agreement or dynamic purchasing system:
      Duration in months: 12       
      This contract is subject to renewal: No       
      Description of renewals: Not provided
      II.2.9) Information about the limits on the number of candidates to be invited:
       Not provided
      Objective criteria for choosing the limited number of candidates: Not provided
      II.2.10) Information about variants:
      Variants will be accepted: No
      II.2.11) Information about options:
      Options:       Yes             
      Description of options: This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.
It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so
      II.2.12) Information about electronic catalogues:
      Tenders must be presented in the form of electronic catalogues or include an electronic catalogue: No
      II.2.13) Information about European Union funds:
      The procurement is related to a project and/or programme financed by European Union funds: No       
      Identification of the project: Not provided             
      II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here:
Lot 6: Large Fabrication Access Code:52F22XQMV9       
II.2) Description Lot No. 7
      
      II.2.1) Title: Lot 7: Vacuum Fabrication – General       
      Lot No: Lot 7       
      II.2.2) Additional CPV codes:
      71333000 - Mechanical engineering services.
      
      II.2.3) Place of performance:
      UK UNITED KINGDOM
      
      II.2.4) Description of procurement: Lot 7: Vacuum Fabrication – General
      II.2.5) Award criteria:
            Price is not the only award criterion and all criteria are stated only in the procurement documents            
      II.2.6) Estimated value:
      Value excluding VAT: Not provided       
      Currency: Not provided       
      II.2.7) Duration of the contract, framework agreement or dynamic purchasing system:
      Duration in months: 12       
      This contract is subject to renewal: No       
      Description of renewals: Not provided
      II.2.9) Information about the limits on the number of candidates to be invited:
       Not provided
      Objective criteria for choosing the limited number of candidates: Not provided
      II.2.10) Information about variants:
      Variants will be accepted: No
      II.2.11) Information about options:
      Options:       Yes             
      Description of options: This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.
It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.
      II.2.12) Information about electronic catalogues:
      Tenders must be presented in the form of electronic catalogues or include an electronic catalogue: No
      II.2.13) Information about European Union funds:
      The procurement is related to a project and/or programme financed by European Union funds: No       
      Identification of the project: Not provided             
      II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here:
Lot 7: Vacuum Fabrication – General Access Code:244R92926T       
II.2) Description Lot No. 8
      
      II.2.1) Title: Lot 8: Vacuum Fabrication – RAL       
      Lot No: Lot 8       
      II.2.2) Additional CPV codes:
      71333000 - Mechanical engineering services.
      
      II.2.3) Place of performance:
      UK UNITED KINGDOM
      
      II.2.4) Description of procurement: Lot 8: Vacuum Fabrication – RAL
      II.2.5) Award criteria:
            Price is not the only award criterion and all criteria are stated only in the procurement documents            
      II.2.6) Estimated value:
      Value excluding VAT: Not provided       
      Currency: Not provided       
      II.2.7) Duration of the contract, framework agreement or dynamic purchasing system:
      Duration in months: 12       
      This contract is subject to renewal: No       
      Description of renewals: Not provided
      II.2.9) Information about the limits on the number of candidates to be invited:
       Not provided
      Objective criteria for choosing the limited number of candidates: Not provided
      II.2.10) Information about variants:
      Variants will be accepted: No
      II.2.11) Information about options:
      Options:       Yes             
      Description of options: This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.
It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.
      II.2.12) Information about electronic catalogues:
      Tenders must be presented in the form of electronic catalogues or include an electronic catalogue: No
      II.2.13) Information about European Union funds:
      The procurement is related to a project and/or programme financed by European Union funds: No       
      Identification of the project: Not provided             
      II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here:
Lot 8: Vacuum Fabrication – RAL Access Code:68669C8C8J       
II.2) Description Lot No. 9
      
      II.2.1) Title: Lot 9: Vacuum Fabrication – DL Astec       
      Lot No: Lot 9       
      II.2.2) Additional CPV codes:
      71333000 - Mechanical engineering services.
      
      II.2.3) Place of performance:
      UK UNITED KINGDOM
      
      II.2.4) Description of procurement: Lot 9: Vacuum Fabrication – DL Astec
      II.2.5) Award criteria:
            Price is not the only award criterion and all criteria are stated only in the procurement documents            
      II.2.6) Estimated value:
      Value excluding VAT: Not provided       
      Currency: Not provided       
      II.2.7) Duration of the contract, framework agreement or dynamic purchasing system:
      Duration in months: 12       
      This contract is subject to renewal: No       
      Description of renewals: Not provided
      II.2.9) Information about the limits on the number of candidates to be invited:
       Not provided
      Objective criteria for choosing the limited number of candidates: Not provided
      II.2.10) Information about variants:
      Variants will be accepted: No
      II.2.11) Information about options:
      Options:       Yes             
      Description of options: This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.
It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.
      II.2.12) Information about electronic catalogues:
      Tenders must be presented in the form of electronic catalogues or include an electronic catalogue: No
      II.2.13) Information about European Union funds:
      The procurement is related to a project and/or programme financed by European Union funds: No       
      Identification of the project: Not provided             
      II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here:
Lot 9: Vacuum Fabrication – DL Astec Access Code:XQ3JR9D6ZV       
II.2) Description Lot No. 10
      
      II.2.1) Title: Lot 10: Additive Manufacture – (3D Printing) Plastic       
      Lot No: Lot 10       
      II.2.2) Additional CPV codes:
      71333000 - Mechanical engineering services.
      
      II.2.3) Place of performance:
      UK UNITED KINGDOM
      
      II.2.4) Description of procurement: Lot 10: Additive Manufacture – (3D Printing) Plastic
      II.2.5) Award criteria:
            Price is not the only award criterion and all criteria are stated only in the procurement documents            
      II.2.6) Estimated value:
      Value excluding VAT: Not provided       
      Currency: Not provided       
      II.2.7) Duration of the contract, framework agreement or dynamic purchasing system:
      Duration in months: 12       
      This contract is subject to renewal: No       
      Description of renewals: Not provided
      II.2.9) Information about the limits on the number of candidates to be invited:
       Not provided
      Objective criteria for choosing the limited number of candidates: Not provided
      II.2.10) Information about variants:
      Variants will be accepted: No
      II.2.11) Information about options:
      Options:       Yes             
      Description of options: This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.
It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.
      II.2.12) Information about electronic catalogues:
      Tenders must be presented in the form of electronic catalogues or include an electronic catalogue: No
      II.2.13) Information about European Union funds:
      The procurement is related to a project and/or programme financed by European Union funds: No       
      Identification of the project: Not provided             
      II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for - provided here:
Lot 10: Additive Manufacture – (3D Printing) Plastic Access Code:4NTBAA68F8       
II.2) Description Lot No. 11
      
      II.2.1) Title: Lot 11: Additive Manufacture – (3D printing) Metallic       
      Lot No: Lot 11       
      II.2.2) Additional CPV codes:
      71333000 - Mechanical engineering services.
      
      II.2.3) Place of performance:
      UK UNITED KINGDOM
      
      II.2.4) Description of procurement: Lot 11: Additive Manufacture – (3D printing) Metallic
      II.2.5) Award criteria:
            Price is not the only award criterion and all criteria are stated only in the procurement documents            
      II.2.6) Estimated value:
      Value excluding VAT: Not provided       
      Currency: Not provided       
      II.2.7) Duration of the contract, framework agreement or dynamic purchasing system:
      Duration in months: 12       
      This contract is subject to renewal: No       
      Description of renewals: Not provided
      II.2.9) Information about the limits on the number of candidates to be invited:
       Not provided
      Objective criteria for choosing the limited number of candidates: Not provided
      II.2.10) Information about variants:
      Variants will be accepted: No
      II.2.11) Information about options:
      Options:       Yes             
      Description of options: This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.
It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.
      II.2.12) Information about electronic catalogues:
      Tenders must be presented in the form of electronic catalogues or include an electronic catalogue: No
      II.2.13) Information about European Union funds:
      The procurement is related to a project and/or programme financed by European Union funds: No       
      Identification of the project: Not provided             
      II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for - provided here:
Lot 11: Additive Manufacture – (3D printing) Metallic Access Code:YR5783E5T6       


Section III: Legal, Economic, Financial And Technical Information
   III.1) Conditions for participation
      III.1.1) Suitability to pursue the professional activity, including requirements relating to enrolment on professional or trade registers
      List and brief description of conditions:          
      Not Provided       
      III.1.2) Economic and financial standing       
      List and brief description of selection criteria:       
      Not Provided    
      Minimum level(s) of standards possibly required (if applicable) :       
      Not Provided    
      III.1.3) Technical and professional ability
      List and brief description of selection criteria:       
      Not Provided      
      Minimum level(s) of standards possibly required (if applicable) :          
      Not Provided   
      III.1.5) Information about reserved contracts (if applicable)   
      The contract is reserved to sheltered workshops and economic operators aiming at the social and professional integration of disabled or disadvantaged persons: No       
      The execution of the contract is restricted to the framework of sheltered employment programmes: No    
      
   III.2) Conditions related to the contract
      III.2.1) Information about a particular profession    
      Reference to the relevant law, regulation or administrative provision:          
      Not Provided    
      III.2.2) Contract performance conditions          
      Not Provided          
      III.2.3) Information about staff responsible for the performance of the contract
      Obligation to indicate the names and professional qualifications of the staff assigned to performing the contract: No

Section IV: Procedure
   IV.1) Description RESTRICTED
      IV.1.1) Type of procedure: Restricted   
   
   IV.1.3) Information about a framework agreement or a dynamic purchasing system    
         The procurement involves the establishment of a framework agreement - NO        
         The procurement involves the setting up of a dynamic purchasing system          
         In the case of framework agreements justification for any duration exceeding 4 years: Not Provided    
   
   
   IV.1.6) Information about electronic auction:
      An electronic auction will be used: No
      Additional information about electronic auction: Not provided
   IV.1.8) Information about the Government Procurement Agreement (GPA)
      The procurement is covered by the Government Procurement Agreement: Yes       
   IV.2) Administrative information
      IV.2.1) Previous publication concerning this procedure:
         Notice number in the OJ S: Not provided       
      IV.2.2) Time limit for receipt of tenders or requests to participate
       Date: 31/01/2023 Time: 19:00
      IV.2.3) Estimated date of dispatch of invitations to tender or to participate to selected candidates: Not Provided       
      IV.2.4) Languages in which tenders or requests to participate may be submitted: English,       
      IV.2.6) Minimum time frame during which the tenderer must maintain the tender: Not Provided      
      

Section VI: Complementary Information
   VI.1) Information about recurrence
   This is a recurrent procurement: No    
   Estimated timing for further notices to be published: Not provided
   VI.2) Information about electronic workflows
   Electronic ordering will be used No       
   Electronic invoicing will be accepted No       
   Electronic payment will be used No       
   VI.3) Additional Information: The DPS will be hosted here: https://ukri.delta-esourcing.com/ . In order to apply to join the DPS, you will need to register on the Portal. Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access codes are provided here:
Lot 1: Small/Medium Machining Access Code:Q597GZADPB
Lot 2: Large Machining Access Code:6GPFN76R33
Lot 3: RAL Space Machining Access Code:79E5QRB95C
Lot 4: Electro Discharge Machining (EDM) Access Code:M7B7V7D757
Lot 5: Small/Medium Fabrication Access Code:PHA8D7XZ29
Lot 6: Large Fabrication Access Code:52F22XQMV9
Lot 7: Vacuum Fabrication – General Access Code:244R92926T
Lot 8: Vacuum Fabrication – RAL Access Code:68669C8C8J
Lot 9: Vacuum Fabrication – DL Astec Access Code:XQ3JR9D6ZV
Lot 10: Additive Manufacture – (3D Printing) Plastic Access Code:4NTBAA68F8
Lot 11: Additive Manufacture – (3D printing) Metallic Access Code:YR5783E5T6

Suppliers may apply to join the DPS or apply to join additional Lots of the DPS at any time during the period of validity of the DPS.

The DPS Documentation will remain electronically accessible and available for the duration of the DPS and can be accessed via the DPS Portal. All correspondence and submission of documents must be through the portal.

Suppliers can apply to join the DPS either at the "Initial Joining Stage" or at any time during the period of validity of the DPS "Ongoing Joining Stage":
Initial Joining Stage:
•Suppliers, who wish to join at the Initial Joining Stage, must submit their Selection Questionnaire on the Portal on or before “the Deadline for Applications for the Initial Joining Stage" as stated in Section 2.3 of the RFI.
•UKRI will evaluate each Selection Questionnaire to determine whether the Minimum Selection Criteria are met. It is anticipated that there may be a high interest at the Initial Joining Stage which may affect this timeframe and UKRI have therefore opted to apply an extended initial evaluation period as per the timescales at Section 2.3 of the RFI.
•UKRI will notify both successful and unsuccessful Suppliers of the outcome.
•No Mini Competitions will commence until all suppliers who applied to join the DPS at the initial joining stage have been notified of the outcome.

Ongoing Joining Stage:
•If a Supplier does not submit their Selection Questionnaire by the Deadline for Applications for the Initial Joining Stage, they can submit their Selection Questionnaire on the DPS Portal at any time during the period of validity of the DPS.
•UKRI will evaluate each Selection Questionnaire to determine whether the Minimum Selection Criteria are met and notify the Supplier as to whether its Selection Questionnaire was successful within 15 working days of receipt of the Selection Questionnaire.


The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement.
To view this notice, please click here:
https://ukri.delta-esourcing.com/delta/viewNotice.html?noticeId=627255452
   VI.4) Procedures for review
   VI.4.1) Review body:
             UKRI
       Swindon, SN2 1FL, United Kingdom
   VI.4.2) Body responsible for mediation procedures:
Not provided
   VI.4.3) Review procedure
   Precise information on deadline(s) for review procedures:    
    Not Provided    
   VI.4.4) Service from which information about the lodging of appeals may be obtained:
Not provided
   VI.5) Date Of Dispatch Of This Notice: 01/11/2021

Annex A


View any Notice Addenda

UKRI-1307 Outside Manufacturing Dynamic Purchasing System (OM DPS)

UK-Swindon: Mechanical engineering services.

Section I: Contracting authority/entity (as stated in the original notice)

I.1) Name and addresses
       UK Research and Innovation
       Polaris House, North Star Avenue, Swindon, SN2 1FL, United Kingdom
       Tel. +44 1235446100, Email: procurement@stfc.ac.uk
       Contact: UKRI STFC Procurement
       Main Address: https://www.ukri.org
       NUTS Code: UK

Section II: Object (as stated in the original notice)

II.1) Scope of the procurement
   
   II.1.1) Title: UKRI-1307 Outside Manufacturing Dynamic Purchasing System (OM DPS)      Reference number: UKRI-1307      
   II.1.2) Main CPV code:
      71333000 - Mechanical engineering services.
   
   II.1.3) Type of contract: SERVICES   
   II.1.4) Short Description: STFC, procure a considerable number of mechanical engineering bespoke and low volume production items during a year. Precision manufacture and sub assembly services are required to assist delivery on demanding engineering projects. To support this activity, UKRI intend to establish a Dynamic Purchasing System (DPS) for the provision of Outside Manufacturing (OM).The DPS will be divided into Lots according to the different manufacturing categories, as summarised below: Lot 1: Small/Medium Machining Lot 2: Large Machining Lot 3: RAL Space Machining Lot 4: Electro Discharge Machining (EDM) Lot 5: Small/Medium Fabrication Lot 6: Large Fabrication Lot 7: Vacuum Fabrication - General Lot 8: Vacuum Fabrication - RAL Lot 9: Vacuum Fabrication – DL Astec Lot 10: Additive Manufacture – (3D Printing) Plastic. Lot 11: Additive Manufacture – (3D printing) Metallic

Section VI: Complementary information

V1.5) Date of dispatch of this notice: 22/12/2022

VI.6) Original notice reference:

   Notice Reference:    2022 - 366140   
   Notice number in OJ S:    2022/S 000 - 366140
   Date of dispatch of the original notice: 01/11/2021

Section VII: Changes

VII.1) Information to be changed or added

      VII.1.1) Reason for change: Modification of original information submitted by the contracting authority    
      
      VII.1.2) Text to be corrected in original notice No: 1
                                    
         Section Number: IV.2.2          
         Place of text to be modified: Time limit for receipt of tenders or requests to participate          
         Instead of:
         Date: 31/01/2023         
         Local Time: 19:00          
         Read:
         Date: 31/01/2024         
         Local Time: 19:00                   
   
VII.2) Other additional information: For more information about this opportunity, please visit the Delta eSourcing portal at:
https://ukri.delta-esourcing.com/tenders/UK-UK-Swindon:-Mechanical-engineering-services./Q597GZADPB

To respond to this opportunity, please click here:
https://ukri.delta-esourcing.com/respond/Q597GZADPB



UKRI-1307 Outside Manufacturing Dynamic Purchasing System (OM DPS)

UK-Swindon: Mechanical engineering services.

Section I: Contracting authority/entity (as stated in the original notice)

I.1) Name and addresses
       UK Research and Innovation
       Polaris House, North Star Avenue, Swindon, SN2 1FL, United Kingdom
       Tel. +44 1235446100, Email: procurement@stfc.ac.uk
       Contact: UKRI STFC Procurement
       Main Address: https://www.ukri.org
       NUTS Code: UK

Section II: Object (as stated in the original notice)

II.1) Scope of the procurement
   
   II.1.1) Title: UKRI-1307 Outside Manufacturing Dynamic Purchasing System (OM DPS)      Reference number: UKRI-1307      
   II.1.2) Main CPV code:
      71333000 - Mechanical engineering services.
   
   II.1.3) Type of contract: SERVICES   
   II.1.4) Short Description: STFC, procure a considerable number of mechanical engineering bespoke and low volume production items during a year. Precision manufacture and sub assembly services are required to assist delivery on demanding engineering projects. To support this activity, UKRI intend to establish a Dynamic Purchasing System (DPS) for the provision of Outside Manufacturing (OM).The DPS will be divided into Lots according to the different manufacturing categories, as summarised below: Lot 1: Small/Medium Machining Lot 2: Large Machining Lot 3: RAL Space Machining Lot 4: Electro Discharge Machining (EDM) Lot 5: Small/Medium Fabrication Lot 6: Large Fabrication Lot 7: Vacuum Fabrication - General Lot 8: Vacuum Fabrication - RAL Lot 9: Vacuum Fabrication – DL Astec Lot 10: Additive Manufacture – (3D Printing) Plastic. Lot 11: Additive Manufacture – (3D printing) Metallic

Section VI: Complementary information

V1.5) Date of dispatch of this notice: 23/01/2024

VI.6) Original notice reference:

   Notice Reference:    2024 - 594205   
   Notice number in OJ S:    2021/S 000 - 027307
   Date of dispatch of the original notice: 04/07/2023

Section VII: Changes

VII.1) Information to be changed or added

      VII.1.1) Reason for change: Modification of original information submitted by the contracting authority    
      
      VII.1.2) Text to be corrected in original notice No: 1
                                    
         Section Number: IV.2.2          
         Place of text to be modified: Time limit for receipt of tenders or requests to participate Date          
         Instead of:
         Date: 31/01/2024         
         Local Time: 19:00          
         Read:
         Date: 31/03/2025         
         Local Time: 14:00                   
   
VII.2) Other additional information: To view this notice, please click here:
https://ukri.delta-esourcing.com/delta/viewNotice.html?noticeId=837551761


View Award Notice

UK-Swindon: Mechanical engineering services.

Section I: Contracting Authority

   I.1) Name, Addresses and Contact Point(s):
       UK Research and Innovation
       Polaris House, North Star Avenue, Swindon, SN2 1FL, United Kingdom
       Tel. +44 1235446100, Email: procurement@stfc.ac.uk
       Contact: UKRI STFC Procurement
       Main Address: https://www.ukri.org
       NUTS Code: UK

   I.2) Joint procurement:
      The contract involves joint procurement: No          
      In the case of joint procurement involving different countries, state applicable national procurement law: Not Provided
      The contract is awarded by a central purchasing body: No

   I.4)Type of the contracting authority:
      Body governed by public law

   I.5) Main activity:
      Other activity: Research and Innovation

Section II: Object Of The Contract

   II.1) Scope of the procurement

      II.1.1) Title: UKRI-1307 Outside Manufacturing Dynamic Purchasing System (OM DPS)            
      Reference number: UKRI-1307

      II.1.2) Main CPV code:
         71333000 - Mechanical engineering services.


      II.1.3) Type of contract: SERVICES

      II.1.4) Short description: STFC, procure a considerable number of mechanical engineering bespoke and low volume production items during a year. Precision manufacture and sub assembly services are required to assist delivery on demanding engineering projects. To support this activity, UKRI intend to establish a Dynamic Purchasing System (DPS) for the provision of Outside Manufacturing (OM).The DPS will be divided into Lots according to the different manufacturing categories, as summarised below: Lot 1: Small/Medium Machining Lot 2: Large Machining Lot 3: RAL Space Machining Lot 4: Electro Discharge Machining (EDM) Lot 5: Small/Medium Fabrication Lot 6: Large Fabrication Lot 7: Vacuum Fabrication - General Lot 8: Vacuum Fabrication - RAL Lot 9: Vacuum Fabrication – DL Astec Lot 10: Additive Manufacture – (3D Printing) Plastic. Lot 11: Additive Manufacture – (3D printing) Metallic

      II.1.6) Information about lots
         This contract is divided into lots: Yes
                                                                                    
      II.1.7) Total value of the procurement (excluding VAT)
          Value: 109,018.49
                  
         Currency:GBP            

   II.2) Description (lot no. 1)
   

      II.2.1) Title:Lot 1: Small/Medium Machining   
      Lot No:Lot 1

      II.2.2) Additional CPV code(s):
            71333000 - Mechanical engineering services.


      II.2.3) Place of performance
      Nuts code:
      UK - UNITED KINGDOM
   
      Main site or place of performance:
      UNITED KINGDOM
             

      II.2.4) Description of the procurement: Lot 1: Small/Medium Machining

      II.2.5) Award criteria:
       Not Provided

      II.2.11) Information about options
         Options: Yes
         Description of these options:This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.

It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.

      II.2.13) Information about European Union funds
         The procurement is related to a project and/or programme financed by European Union funds: No
         

      II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here:
Lot 1: Small/Medium Machining Access Code:Q597GZADPB

   II.2) Description (lot no. 2)
   

      II.2.1) Title:Lot 2: Large Machining   
      Lot No:Lot 2

      II.2.2) Additional CPV code(s):
            71333000 - Mechanical engineering services.


      II.2.3) Place of performance
      Nuts code:
      UK - UNITED KINGDOM
   
      Main site or place of performance:
      UNITED KINGDOM
             

      II.2.4) Description of the procurement: Lot 2: Large Machining

      II.2.5) Award criteria:
       Not Provided

      II.2.11) Information about options
         Options: Yes
         Description of these options:This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.

It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.

      II.2.13) Information about European Union funds
         The procurement is related to a project and/or programme financed by European Union funds: No
         

      II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here:
Lot 2: Large Machining Access Code:6GPFN76R33

   II.2) Description (lot no. 3)
   

      II.2.1) Title:Lot 3: RAL Space Machining   
      Lot No:Lot 3

      II.2.2) Additional CPV code(s):
            71333000 - Mechanical engineering services.


      II.2.3) Place of performance
      Nuts code:
      UK - UNITED KINGDOM
   
      Main site or place of performance:
      UNITED KINGDOM
             

      II.2.4) Description of the procurement: Lot 3: RAL Space Machining

      II.2.5) Award criteria:
       Not Provided

      II.2.11) Information about options
         Options: Yes
         Description of these options:This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.
It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.

      II.2.13) Information about European Union funds
         The procurement is related to a project and/or programme financed by European Union funds: No
         

      II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here:
Lot 3: RAL Space Machining Access Code:79E5QRB95C

   II.2) Description (lot no. 4)
   

      II.2.1) Title:Lot 4: Electro Discharge Machining (EDM)   
      Lot No:Lot 4

      II.2.2) Additional CPV code(s):
            71333000 - Mechanical engineering services.


      II.2.3) Place of performance
      Nuts code:
      UK - UNITED KINGDOM
   
      Main site or place of performance:
      UNITED KINGDOM
             

      II.2.4) Description of the procurement: Lot 4: Electro Discharge Machining (EDM)

      II.2.5) Award criteria:
       Not Provided

      II.2.11) Information about options
         Options: Yes
         Description of these options:This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.

It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.

      II.2.13) Information about European Union funds
         The procurement is related to a project and/or programme financed by European Union funds: No
         

      II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here:
Lot 4: Electro Discharge Machining (EDM) Access Code:M7B7V7D757

   II.2) Description (lot no. 5)
   

      II.2.1) Title:Lot 5: Small/Medium Fabrication   
      Lot No:Lot 5

      II.2.2) Additional CPV code(s):
            71333000 - Mechanical engineering services.


      II.2.3) Place of performance
      Nuts code:
      UK - UNITED KINGDOM
   
      Main site or place of performance:
      UNITED KINGDOM
             

      II.2.4) Description of the procurement: Lot 5: Small/Medium Fabrication

      II.2.5) Award criteria:
       Not Provided

      II.2.11) Information about options
         Options: Yes
         Description of these options:This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.
It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.

      II.2.13) Information about European Union funds
         The procurement is related to a project and/or programme financed by European Union funds: No
         

      II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here:
Lot 5: Small/Medium Fabrication Access Code:PHA8D7XZ29

   II.2) Description (lot no. 6)
   

      II.2.1) Title:Lot 6: Large Fabrication   
      Lot No:Lot 6

      II.2.2) Additional CPV code(s):
            71333000 - Mechanical engineering services.


      II.2.3) Place of performance
      Nuts code:
      UK - UNITED KINGDOM
   
      Main site or place of performance:
      UNITED KINGDOM
             

      II.2.4) Description of the procurement: Lot 6: Large Fabrication

      II.2.5) Award criteria:
       Not Provided

      II.2.11) Information about options
         Options: Yes
         Description of these options:This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.
It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so

      II.2.13) Information about European Union funds
         The procurement is related to a project and/or programme financed by European Union funds: No
         

      II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here:
Lot 6: Large Fabrication Access Code:52F22XQMV9

   II.2) Description (lot no. 7)
   

      II.2.1) Title:Lot 7: Vacuum Fabrication – General   
      Lot No:Lot 7

      II.2.2) Additional CPV code(s):
            71333000 - Mechanical engineering services.


      II.2.3) Place of performance
      Nuts code:
      UK - UNITED KINGDOM
   
      Main site or place of performance:
      UNITED KINGDOM
             

      II.2.4) Description of the procurement: Lot 7: Vacuum Fabrication – General

      II.2.5) Award criteria:
                  
      Price - Weighting: 10
            

      II.2.11) Information about options
         Options: Yes
         Description of these options:This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration. It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.

      II.2.13) Information about European Union funds
         The procurement is related to a project and/or programme financed by European Union funds: No
         

      II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/ Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here: Lot 7: Vacuum Fabrication – General Access Code:244R92926T

   II.2) Description (lot no. 8)
   

      II.2.1) Title:Lot 8: Vacuum Fabrication – RAL   
      Lot No:Lot 8

      II.2.2) Additional CPV code(s):
            71333000 - Mechanical engineering services.


      II.2.3) Place of performance
      Nuts code:
      UK - UNITED KINGDOM
   
      Main site or place of performance:
      UNITED KINGDOM
             

      II.2.4) Description of the procurement: Lot 8: Vacuum Fabrication – RAL

      II.2.5) Award criteria:
       Not Provided

      II.2.11) Information about options
         Options: Yes
         Description of these options:This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration. It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.

      II.2.13) Information about European Union funds
         The procurement is related to a project and/or programme financed by European Union funds: No
         

      II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/ Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here: Lot 8: Vacuum Fabrication – RAL Access Code:68669C8C8J

   II.2) Description (lot no. 9)
   

      II.2.1) Title:Lot 9: Vacuum Fabrication – DL Astec   
      Lot No:Lot 9

      II.2.2) Additional CPV code(s):
            71333000 - Mechanical engineering services.


      II.2.3) Place of performance
      Nuts code:
      UK - UNITED KINGDOM
   
      Main site or place of performance:
      UNITED KINGDOM
             

      II.2.4) Description of the procurement: Lot 9: Vacuum Fabrication – DL Astec

      II.2.5) Award criteria:
                  
      Price - Weighting: 10
            

      II.2.11) Information about options
         Options: Yes
         Description of these options:This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration. It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.

      II.2.13) Information about European Union funds
         The procurement is related to a project and/or programme financed by European Union funds: No
         

      II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/ Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for. The access code for this Lot is provided here: Lot 9: Vacuum Fabrication – DL Astec Access Code:XQ3JR9D6ZV

   II.2) Description (lot no. 10)
   

      II.2.1) Title:Lot 10: Additive Manufacture – (3D Printing) Plastic   
      Lot No:Lot 10

      II.2.2) Additional CPV code(s):
            71333000 - Mechanical engineering services.


      II.2.3) Place of performance
      Nuts code:
      UK - UNITED KINGDOM
   
      Main site or place of performance:
      UNITED KINGDOM
             

      II.2.4) Description of the procurement: Lot 10: Additive Manufacture – (3D Printing) Plastic

      II.2.5) Award criteria:
       Not Provided

      II.2.11) Information about options
         Options: Yes
         Description of these options:This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.
It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.

      II.2.13) Information about European Union funds
         The procurement is related to a project and/or programme financed by European Union funds: No
         

      II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for - provided here:
Lot 10: Additive Manufacture – (3D Printing) Plastic Access Code:4NTBAA68F8

   II.2) Description (lot no. 11)
   

      II.2.1) Title:Lot 11: Additive Manufacture – (3D printing) Metallic   
      Lot No:Lot 11

      II.2.2) Additional CPV code(s):
            71333000 - Mechanical engineering services.


      II.2.3) Place of performance
      Nuts code:
      UK - UNITED KINGDOM
   
      Main site or place of performance:
      UNITED KINGDOM
             

      II.2.4) Description of the procurement: Lot 11: Additive Manufacture – (3D printing) Metallic

      II.2.5) Award criteria:
       Not Provided

      II.2.11) Information about options
         Options: Yes
         Description of these options:This DPS has the option to be extended for a further two years on an annual basis taking the anticipated duration to three years. The estimated spend is based on a three year duration.
It is possible that the DPS may be extended further beyond this date and UKRI will issue a contract notice if it does so.

      II.2.13) Information about European Union funds
         The procurement is related to a project and/or programme financed by European Union funds: No
         

      II.2.14) Additional information: Before you can participate in this tender you must have an account which you can register for here: https://ukri.delta-esourcing.com/
Once logged in, go to your Response Manager and add the Access Code supplied in this notice for the specific Lot you are interested in applying for - provided here:
Lot 11: Additive Manufacture – (3D printing) Metallic Access Code:YR5783E5T6


Section IV: Procedure

IV.1) Description

   IV.1.1)Type of procedure: Restricted


   IV.1.3) Information about a framework agreement or a dynamic purchasing system
      The procurement involves the establishment of a framework agreement: No       
      A dynamic purchasing system was set up: Yes

   IV.1.6) Information about electronic auction
      An electronic auction has been used: No

   IV.1.8) Information about the Government Procurement Agreement (GPA)
      The procurement is covered by the Government Procurement Agreement: Yes

IV.2) Administrative information

   IV.2.1) Previous publication concerning this procedure
       Notice number in the OJEU: 2022/S 000-036319
      
   IV.2.8) Information about termination of dynamic purchasing system
      The notice involves the termination of the dynamic purchasing system published by the above contract notice: No

   IV.2.9) Information about termination of call for competition in the form of a prior information notice
      The contracting authority will not award any further contracts based on the above prior information notice: No

Section V: Award of contract

Award Of Contract (No.1)

   Contract No: UKRI-1307    
   Lot Number: Not Provided    
   Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

   A contract/lot is awarded: Yes


   V.2) Award of contract

      V.2.1) Date of conclusion of the contract: 30/06/2023

      V.2.2) Information about tenders
         Number of tenders received: 1
         Number of tenders received from SMEs: Not Provided          
         Number of tenders received from tenderers from other EU Member States: Not Provided          
         Number of tenders received from tenderers from non-EU Member States: Not Provided          
         Number of tenders received by electronic means: Not Provided

      V.2.3) Name and address of the contractor

      The contract has been awarded to a group of economic operators: No
         
         Contractor (No.1)
             Atlantic Precision Engineering Ltd, 02448830
             Sovereign House,, 155 High Street, Aldershot, GU11 1TT, United Kingdom
             NUTS Code: UKJ36
            The contractor is an SME: Yes

      V.2.4) Information on value of the contract/lot (excluding VAT)
         Initial estimated total value of the contract/lot: 7,476          
         Total value of the contract/lot: 7,476
         Currency: GBP

      V.2.5) Information about subcontracting
         The contract is likely to be subcontracted: No
         

Award Of Contract (No.2)

   Contract No: Not Provided    
   Lot Number: Not Provided    
   Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

   A contract/lot is awarded: Yes


   V.2) Award of contract

      V.2.1) Date of conclusion of the contract: 30/06/2023

      V.2.2) Information about tenders
         Number of tenders received: 1
         Number of tenders received from SMEs: Not Provided          
         Number of tenders received from tenderers from other EU Member States: Not Provided          
         Number of tenders received from tenderers from non-EU Member States: Not Provided          
         Number of tenders received by electronic means: Not Provided

      V.2.3) Name and address of the contractor

      The contract has been awarded to a group of economic operators: No
         
         Contractor (No.1)
             Atomic Precision Ltd, 12301683
             39 Blenheim Gardens, Wantage, OX12 0NP, United Kingdom
             NUTS Code: UKJ14
            The contractor is an SME: Yes

      V.2.4) Information on value of the contract/lot (excluding VAT)
         Initial estimated total value of the contract/lot: 1,440          
         Total value of the contract/lot: 1,440
         Currency: GBP

      V.2.5) Information about subcontracting
         The contract is likely to be subcontracted: No
         

Award Of Contract (No.3)

   Contract No: Not Provided    
   Lot Number: Not Provided    
   Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

   A contract/lot is awarded: Yes


   V.2) Award of contract

      V.2.1) Date of conclusion of the contract: 30/06/2023

      V.2.2) Information about tenders
         Number of tenders received: 1
         Number of tenders received from SMEs: Not Provided          
         Number of tenders received from tenderers from other EU Member States: Not Provided          
         Number of tenders received from tenderers from non-EU Member States: Not Provided          
         Number of tenders received by electronic means: Not Provided

      V.2.3) Name and address of the contractor

      The contract has been awarded to a group of economic operators: No
         
         Contractor (No.1)
             Beechwood Engineering Ltd, 03215223
             Cocker Avenue, Lancashire, FY6 8JU, United Kingdom
             NUTS Code: UKD4
            The contractor is an SME: Yes

      V.2.4) Information on value of the contract/lot (excluding VAT)
         Initial estimated total value of the contract/lot: 12,915          
         Total value of the contract/lot: 12,915
         Currency: GBP

      V.2.5) Information about subcontracting
         The contract is likely to be subcontracted: No
         

Award Of Contract (No.4)

   Contract No: Not Provided    
   Lot Number: Not Provided    
   Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

   A contract/lot is awarded: Yes


   V.2) Award of contract

      V.2.1) Date of conclusion of the contract: 30/06/2023

      V.2.2) Information about tenders
         Number of tenders received: 1
         Number of tenders received from SMEs: Not Provided          
         Number of tenders received from tenderers from other EU Member States: Not Provided          
         Number of tenders received from tenderers from non-EU Member States: Not Provided          
         Number of tenders received by electronic means: Not Provided

      V.2.3) Name and address of the contractor

      The contract has been awarded to a group of economic operators: No
         
         Contractor (No.1)
             GJ Maintenance Engineering Ltd, 07484508
             Dock Road Ind Est, Deeside, CH5 4DS, United Kingdom
             NUTS Code: UKL
            The contractor is an SME: No

      V.2.4) Information on value of the contract/lot (excluding VAT)
         Initial estimated total value of the contract/lot: 7,146.9          
         Total value of the contract/lot: 7,146.9
         Currency: GBP

      V.2.5) Information about subcontracting
         The contract is likely to be subcontracted: No
         

Award Of Contract (No.5)

   Contract No: Not Provided    
   Lot Number: Not Provided    
   Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

   A contract/lot is awarded: Yes


   V.2) Award of contract

      V.2.1) Date of conclusion of the contract: 30/06/2023

      V.2.2) Information about tenders
         Number of tenders received: 1
         Number of tenders received from SMEs: Not Provided          
         Number of tenders received from tenderers from other EU Member States: Not Provided          
         Number of tenders received from tenderers from non-EU Member States: Not Provided          
         Number of tenders received by electronic means: Not Provided

      V.2.3) Name and address of the contractor

      The contract has been awarded to a group of economic operators: No
         
         Contractor (No.1)
             H/T Portland Limited, 08008485
             Leanne House 6 Avon Close, Weymouth, DT4 9UX, United Kingdom
             NUTS Code: UKK25
            The contractor is an SME: Yes

      V.2.4) Information on value of the contract/lot (excluding VAT)
         Initial estimated total value of the contract/lot: 141.6          
         Total value of the contract/lot: 141.6
         Currency: GBP

      V.2.5) Information about subcontracting
         The contract is likely to be subcontracted: No
         

Award Of Contract (No.6)

   Contract No: Not Provided    
   Lot Number: Not Provided    
   Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

   A contract/lot is awarded: Yes


   V.2) Award of contract

      V.2.1) Date of conclusion of the contract: 30/06/2023

      V.2.2) Information about tenders
         Number of tenders received: 1
         Number of tenders received from SMEs: Not Provided          
         Number of tenders received from tenderers from other EU Member States: Not Provided          
         Number of tenders received from tenderers from non-EU Member States: Not Provided          
         Number of tenders received by electronic means: Not Provided

      V.2.3) Name and address of the contractor

      The contract has been awarded to a group of economic operators: No
         
         Contractor (No.1)
             Machining Technology (Mach-Tech) Ltd, 03513144
             Milton Road, Drayton, OX14 4EZ, United Kingdom
             NUTS Code: UKJ14
            The contractor is an SME: Yes

      V.2.4) Information on value of the contract/lot (excluding VAT)
         Initial estimated total value of the contract/lot: 6,566.6          
         Total value of the contract/lot: 6,566.6
         Currency: GBP

      V.2.5) Information about subcontracting
         The contract is likely to be subcontracted: No
         

Award Of Contract (No.7)

   Contract No: Not Provided    
   Lot Number: Not Provided    
   Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

   A contract/lot is awarded: Yes


   V.2) Award of contract

      V.2.1) Date of conclusion of the contract: 30/06/2023

      V.2.2) Information about tenders
         Number of tenders received: 1
         Number of tenders received from SMEs: Not Provided          
         Number of tenders received from tenderers from other EU Member States: Not Provided          
         Number of tenders received from tenderers from non-EU Member States: Not Provided          
         Number of tenders received by electronic means: Not Provided

      V.2.3) Name and address of the contractor

      The contract has been awarded to a group of economic operators: No
         
         Contractor (No.1)
             Nortemecanica, A-33771445
             Area Industrial de Tabaza I, Asturias, 33469, Spain
             NUTS Code: ES112
            The contractor is an SME: No

      V.2.4) Information on value of the contract/lot (excluding VAT)
         Initial estimated total value of the contract/lot: 12,910          
         Total value of the contract/lot: 12,910
         Currency: GBP

      V.2.5) Information about subcontracting
         The contract is likely to be subcontracted: No
         

Award Of Contract (No.8)

   Contract No: Not Provided    
   Lot Number: Not Provided    
   Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

   A contract/lot is awarded: Yes


   V.2) Award of contract

      V.2.1) Date of conclusion of the contract: 30/06/2023

      V.2.2) Information about tenders
         Number of tenders received: 1
         Number of tenders received from SMEs: Not Provided          
         Number of tenders received from tenderers from other EU Member States: Not Provided          
         Number of tenders received from tenderers from non-EU Member States: Not Provided          
         Number of tenders received by electronic means: Not Provided

      V.2.3) Name and address of the contractor

      The contract has been awarded to a group of economic operators: No
         
         Contractor (No.1)
             Oxton Engineering Company Ltd, 01426174
             Pexion Limited George Street, Chorley, PR7 2BE, United Kingdom
             NUTS Code: UKD47
            The contractor is an SME: Yes

      V.2.4) Information on value of the contract/lot (excluding VAT)
         Initial estimated total value of the contract/lot: 7,178.84          
         Total value of the contract/lot: 7,178.84
         Currency: GBP

      V.2.5) Information about subcontracting
         The contract is likely to be subcontracted: No
         

Award Of Contract (No.9)

   Contract No: Not Provided    
   Lot Number: Not Provided    
   Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

   A contract/lot is awarded: Yes


   V.2) Award of contract

      V.2.1) Date of conclusion of the contract: 30/06/2023

      V.2.2) Information about tenders
         Number of tenders received: 1
         Number of tenders received from SMEs: Not Provided          
         Number of tenders received from tenderers from other EU Member States: Not Provided          
         Number of tenders received from tenderers from non-EU Member States: Not Provided          
         Number of tenders received by electronic means: Not Provided

      V.2.3) Name and address of the contractor

      The contract has been awarded to a group of economic operators: No
         
         Contractor (No.1)
             PM Engineering, 13092725
             16 Stirling Road, London, W3 8DJ, United Kingdom
             NUTS Code: UKI
            The contractor is an SME: No

      V.2.4) Information on value of the contract/lot (excluding VAT)
         Initial estimated total value of the contract/lot: 5,695          
         Total value of the contract/lot: 5,695
         Currency: GBP

      V.2.5) Information about subcontracting
         The contract is likely to be subcontracted: No
         

Award Of Contract (No.10)

   Contract No: Not Provided    
   Lot Number: Not Provided    
   Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

   A contract/lot is awarded: Yes


   V.2) Award of contract

      V.2.1) Date of conclusion of the contract: 30/06/2023

      V.2.2) Information about tenders
         Number of tenders received: 1
         Number of tenders received from SMEs: Not Provided          
         Number of tenders received from tenderers from other EU Member States: Not Provided          
         Number of tenders received from tenderers from non-EU Member States: Not Provided          
         Number of tenders received by electronic means: Not Provided

      V.2.3) Name and address of the contractor

      The contract has been awarded to a group of economic operators: No
         
         Contractor (No.1)
             Premax Engineering Ltd, 01647761
             Unit 8 Swan Lane Industrial, West Bromwich, B70 0NU, United Kingdom
             NUTS Code: UKG
            The contractor is an SME: No

      V.2.4) Information on value of the contract/lot (excluding VAT)
         Initial estimated total value of the contract/lot: 3,670          
         Total value of the contract/lot: 3,670
         Currency: GBP

      V.2.5) Information about subcontracting
         The contract is likely to be subcontracted: No
         

Award Of Contract (No.11)

   Contract No: Not Provided    
   Lot Number: Not Provided    
   Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

   A contract/lot is awarded: Yes


   V.2) Award of contract

      V.2.1) Date of conclusion of the contract: 30/06/2023

      V.2.2) Information about tenders
         Number of tenders received: 1
         Number of tenders received from SMEs: Not Provided          
         Number of tenders received from tenderers from other EU Member States: Not Provided          
         Number of tenders received from tenderers from non-EU Member States: Not Provided          
         Number of tenders received by electronic means: Not Provided

      V.2.3) Name and address of the contractor

      The contract has been awarded to a group of economic operators: No
         
         Contractor (No.1)
             Ridgeway Precision Engineering Limited, 07029212
             Unit 22 W & G Estate, Challow, Wantage, OX12 9TF, United Kingdom
             NUTS Code: UKJ14
            The contractor is an SME: No

      V.2.4) Information on value of the contract/lot (excluding VAT)
         Initial estimated total value of the contract/lot: 4,328.5          
         Total value of the contract/lot: 4,328.5
         Currency: GBP

      V.2.5) Information about subcontracting
         The contract is likely to be subcontracted: No
         

Award Of Contract (No.12)

   Contract No: Not Provided    
   Lot Number: Not Provided    
   Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

   A contract/lot is awarded: Yes


   V.2) Award of contract

      V.2.1) Date of conclusion of the contract: 30/06/2023

      V.2.2) Information about tenders
         Number of tenders received: 1
         Number of tenders received from SMEs: Not Provided          
         Number of tenders received from tenderers from other EU Member States: Not Provided          
         Number of tenders received from tenderers from non-EU Member States: Not Provided          
         Number of tenders received by electronic means: Not Provided

      V.2.3) Name and address of the contractor

      The contract has been awarded to a group of economic operators: No
         
         Contractor (No.1)
             Scanwel Ltd, 01182653
             Unit 15 Enterprise Park, Gwynedd, LL23 7NL, United Kingdom
             NUTS Code: UKL
            The contractor is an SME: Yes

      V.2.4) Information on value of the contract/lot (excluding VAT)
         Initial estimated total value of the contract/lot: 31,317.05          
         Total value of the contract/lot: 31,317.05
         Currency: GBP

      V.2.5) Information about subcontracting
         The contract is likely to be subcontracted: No
         

Award Of Contract (No.13)

   Contract No: Not Provided    
   Lot Number: Not Provided    
   Title: Outside Manufacturing Dynamic Purchasing System (OM DPS)

   A contract/lot is awarded: Yes


   V.2) Award of contract

      V.2.1) Date of conclusion of the contract: 30/06/2023

      V.2.2) Information about tenders
         Number of tenders received: 1
         Number of tenders received from SMEs: Not Provided          
         Number of tenders received from tenderers from other EU Member States: Not Provided          
         Number of tenders received from tenderers from non-EU Member States: Not Provided          
         Number of tenders received by electronic means: Not Provided

      V.2.3) Name and address of the contractor

      The contract has been awarded to a group of economic operators: No
         
         Contractor (No.1)
             TSW Engineers Ltd, 01005663
             Unit 1 Plantation Court, Wirral, CH62 3QR, United Kingdom
             NUTS Code: UKD74
            The contractor is an SME: Yes

      V.2.4) Information on value of the contract/lot (excluding VAT)
         Initial estimated total value of the contract/lot: 8,233          
         Total value of the contract/lot: 8,233
         Currency: GBP

      V.2.5) Information about subcontracting
         The contract is likely to be subcontracted: No
         
Section VI: Complementary information

   VI.3) Additional information: To view this notice, please click here:
https://ukri.delta-esourcing.com/delta/viewNotice.html?noticeId=792642966

   VI.4) Procedures for review

      VI.4.1) Review body
          UKRI
          Swindon, SN2 1FL, United Kingdom

      VI.4.3) Review procedure
         Precise information on deadline(s) for review procedures: Not Provided

      VI.4.4) Service from which information about the review procedure may be obtained
         Not Provided

   VI.5) Date of dispatch of this notice: 04/07/2023